Installation and Configuration Guide for Technicians
Last modified by Scott Kohlmann on 2023/04/20 22:37
Preparation
- Pre-Construction Checklist
- Required Tools and Software
- Site Readiness Checklist
- Startup Checklist
- Toolbox Basics
- Crestron Zūm App Overview
ShowRunnerCLC™ Installation and Network Setup
- Updating Firmware
- Typical Processor Setup
- ZUM-HUB4 Processor Setup
- VC-4 Setup
- DIN-CENCN-2 Setup
- Crestron Ethernet Control Module (CEN-IO) Setup
- Crestron RF Gateway (CEN-GWEXER) Setup
- GLPAC Expansion Setup
- TSW Touchpanel Setup
- Zūm Net Device Setup
Device Addressing
- Acquiring Wireless Devices
- Addressing Devices in the ShowRunnerCLC™ UI
- Addressing Devices from Toolbox
- DALI Ballast Addressing
- DMX Fixture Addressing
- Zūm Wired Device Addressing
Program Configuration
- Area Configuration
- BACnet Configuration
- Keypad Configuration
- Load Configuration and Verification
- Occupancy Configuration
- Pharos Configuration
- SACN / Art-Net DMX Configuration
- DALI Configuration
- Sequence of Operations and Scheduling
- Touchpanel Advanced Configuration
- Zūm Discovery