Installation and Configuration Guide

Preparation

Required Tools and Software

SHOWRUNNER™ Installation and Network Setup

• Updating Firmware
  • Network Devices
  • Controlled Hardware
  • Zūm Wired Specific Notes
• Typical Processor Setup
  • Error Broadcasting
  • IP Configuration
  • Program Load
  • License and Configuration Deployment
  • Set System Time
• ZUM-HUB4 Processor Setup
  • IP Configuration and Console Commands
  • Update NVRAM Folder Permissions
  • Crestron License Generation
  • Accessing the showrunnerHUB™ Web UI
  • Connecting ShowRunnerCLC™ to SSL Connects Devices
• VC-4 Setup
  • Program Install
  • Accessing the ShowRunner™ Console
  • Accessing the ShowRunner™ UIs
• DIN-CENCN-2 Setup
  • IP Configuration
  • Useful Commands
  • Moving Cresnet Devices
• Crestron Ethernet Control Module (CEN-IO) Setup
  • IP Configuration
• Crestron RF Gateway (CEN-GWEXER) Setup
  • IP Configuration
  • RF Channel
  • Acquiring and Addressing Devices
  • Moving/Removing Devices (Unacquiring Devices)
• GLPAC Expansion Setup
  • IP Configuration
  • Loading the GLPAC Expansion Program
• TSW Touchpanel Setup
  • IP Configuration
  • Load the ShowRunnerCLC™ Project
  • Restricting Visible Areas
• Zūm Net Device Setup
  • Identification and IP Configuration
  • Zūm Net Specific Configuration

Device Addressing

• Acquiring Wireless Devices
• Addressing Devices in the ShowRunnerCLC™ UI
  • Device Addressing in the XPanel UI
• Addressing Devices from Toolbox
  • Network Device Tree View
  • Text Console
  • Troubleshooting Tips and Tools
• DALI Ballast Addressing
• DMX Fixture Addressing
  • Physical Characteristics
  • Protocol and Addressing
• Zūm Wired Device Addressing