Installation and Configuration Guide
Version 50.1 by Alexander Mott on 2022/06/20 16:22
Preparation
SHOWRUNNER™ Installation and Network Setup
- Updating Firmware
- Typical Processor Setup
- ZUM-HUB4 Processor Setup
- VC-4 Setup
- DIN-CENCN-2 Setup
- Crestron Ethernet Control Module (CEN-IO) Setup
- Crestron RF Gateway (CEN-GWEXER) Setup
- GLPAC Expansion Setup
- TSW Touchpanel Setup
- Zūm Net Device Setup
Device Addressing
- Acquiring Wireless Devices
- Addressing Devices in the ShowRunnerCLC™ UI
- Addressing Devices from Toolbox
- DALI Ballast Addressing
- DMX Fixture Addressing
- Zūm Wired Device Addressing