Wiki source code of Crestron Zūm Wireless

Version 34.1 by Mark Kohlmann on 2021/12/08 00:15

version	line-number	content
12.1	1	Crestron Zūm Wireless is a locally integrated lighting control system with various global control options. Zūm rooms are self-contained control units with primary logic occurring at the room level. Central control systems offer scheduling and management. SHOWRUNNER™ provides a number of integrations options that allow the designer to optimize the solution design.
1.1	2
	3	==== Integration Options ====
	4
34.1	5	* SHOWRUNNER™ Total Control - The most comprehensive option. Allows seamless (see [[Caveats>>SHOWRUNNER™ User Guide & Wiki.Design Guide.Hardware Design Guide.Crestron Zūm Wireless.WebHome\|\|anchor="caveats"]]) integration of Zūm and non-Zūm Crestron lighting control products. Extensive feature set allows centralized control and management of Zūm rooms. Advanced scheduler provides more flexibility to the facility operator. This solution replaces the ZUM-FLOOR-HUB in the system design.
3.31	6	* SHOWRUNNER™ + AVBRIDGE + Serial Port - Provides scene setting and load control via a dedicated AVBRIDGE in each Zūm room. Requires a dedicated serial port (C2N-IO/CEN-IO-COM2/etc) and a dedicated ZUMMESH-AVBRIDGE per room.
	7	* SHOWRUNNER™ + ZUM-FLOOR-HUB - Provides limited scene recall and room status for Zūm rooms paired with the Floor Hub. SHOWRUNNER™ can export its own areas to the Floor Hub.
1.1	8
	9	==== Feature Matrix ====
	10
11.1	11	(% border="1" style="margin-left:auto; margin-right:auto" %)
3.24	12	\|=Feature\|=SHOWRUNNER™ Total Control\|=SHOWRUNNER™ + AVBRIDGE + Serial Port\|=SHOWRUNNER™ (External Room Export) + ZUM-FLOOR-HUB (Mirror Driver)\|=ZUM-FLOOR-HUB Only\|=Zūm iOS/Android Setup App*
1.2	13	\|(% colspan="6" %)Hardware Requirements
3.36	14	\|Requires JBOX with ZUMMESH-NETBRIDGE\|Y\|N\|Y\|Y\|Y
1.1	15	\|Requires ZUMMESH-GATEWAY\|Y\|N\|Y\|Y\|N/A
3.36	16	\|Requires Dedicated RS-232 Serial Port per Room\|N\|Y\|N\|N\|N/A
3.31	17	\|Requires 3 or 4-Series Control System\|Y\|Y\|Y\|N\|N/A
16.1	18	\|Requires Physical Presence in Room to Change Scenes\|N\|N\|Y, via Zūm Setup App\|Y, via Zūm Setup App\|Y
1.2	19	\|(% colspan="6" %)User Interfaces
	20	\|Web Browser\|(((
	21	Crestron SmartGraphics XPanel
25.1	22	HTML5 UI Under Development (Q2 2021)
1.2	23	)))\|Crestron SmartGraphics XPanel
25.1	24	HTML5 UI Under Development (Q2 2021)\|SHOWRUNNER™ - Crestron SmartGraphics XPanel
1.2	25	ZUM-FLOOR-HUB - HTML5 UI\|HTML5 UI\|N
3.1	26	\|iOS/Android\|Y, Crestron App (Paid Upgrade)\|Y, Crestron App (Paid Upgrade)\|Y, Crestron App (Paid Upgrade), Limited Features for Zūm Rooms\|N\|Y*
1.2	27	\|Touchscreens (Crestron TSW series)\|Y\|Y\|Y, Limited Features for Zūm Rooms\|N\|N
	28	\|(% colspan="6" %)Features
16.1	29	\|Scene Recall\|Y ~~~~\|Y ~~~~\|Y\|Y\|Y
	30	\|Override Fade Time for Scene Recall ~~\|Y\|N\|N\|N\|N
	31	\|Scene Save\|Y ~~~~\|Y ~~~~\|N\|N\|Y
21.1	32	\|Load Control\|Y ~~/~~~~*\|Y ~~**\|N\|N\|Y
1.2	33	\|Demand Response\|Y\|N\|Y, separate triggers for SHOWRUNNER™ and ZUM-FLOOR-HUB required\|Y\|N
	34	\|Enable/Disable Occupancy\|Y\|Y\|Y, from Floor Hub\|Y\|Y
	35	\|Override Occupancy Logic\|Y\|Y\|N\|N\|N
27.1	36	\|Override\|Y~~~~~~\|N\|Scene Recall only via ShowRunner\|N\|N/A
2.1	37	\|Plug Load On/Off\|Y\|Y\|Y\|Y\|By Hardware
3.24	38	\|Integration with Non-Zūm Crestron Hardware\|Y\|Y\|N\|N\|N
30.1	39	\|Custom Zūm Keypad Programming\|(((
	40	Y, per individual button (1 through 4)
	41	AV Keypad not required (v3.004 or later)
	42	[[Details>>doc:SHOWRUNNER™ User Guide & Wiki.Troubleshooting.Zummesh Keypad Custom Programming.WebHome]]
	43	)))\|Y, Zūm AV Keypad Only\|N\|N\|Y, within the limits of the hardware
3.20	44	\|New Feature Release Cycle\|Aggressive\|Aggressive\|SHOWRUNNER™: Aggressive
	45	Floor Hub: 6-12 months\|6-12 months\|6-12 months
3.24	46	\|Room Organization\|(((
	47	Under Development:
	48	Building/Floor/Sub-Group/Area
3.31	49	Categorization to Filter by Category/Tag
3.24	50	)))\|See SHOWRUNNER™ Total Control\|SHOWRUNNER™: See SHOWRUNNER™ Total Control
	51	Floor Hub: Category/Room\|Category/Room\|(((
	52	N/A
	53	)))
3.36	54	\|Room Discovery\|Automatic Discovery of Gateways and NETBRIDGES\|Pre-Configured at Order\|SHOWRUNNER™: Pre-Configured at Order
3.31	55	Floor Hub: Map Mirrored Rooms to SHOWRUNNER™ and Discovery External Rooms\|Automatic Discovery of Gateways and NETBRIDGES\|N/A
3.36	56	\|Firmware Updates\|PUF Tool
	57	Automatic Support on Roadmap\|(((
	58	PUF Tool
	59	Automatic Support on Roadmap
	60	)))\|SHOWRUNNER™: PUF Tool
	61	Floor Hub: Automatic, Internet Connection Required\|Automatic, Internet Connection Required\|N/A
2.1	62	\|(% colspan="6" %)Calendar/Scheduling
3.1	63	\|Logic Type\|Event Driven
	64	Profile Support (Under Development)\|Event Driven
	65	Profile Support (Under Development)\|SHOWRUNNER™: Event Driven
	66	Floor Hub: Pattern assigned to Category\|Pattern assigned to Category\|N/A
3.31	67	\|Astronomical Clock\|Y\|Y\|Y, Per Category\|Y, Per Category\|N/A
3.1	68	\|Holidays\|Pattern\|Pattern\|SHOWRUNNER™: Pattern
	69	Floor Hub: Hard Coded\|Hard Coded\|N/A
	70	\|Custom Patterns\|Y, Advanced Scheduler License\|Y, Advanced Scheduler License\|SHOWRUNNER™: Y, Advanced Scheduler License
	71	Floor Hub: N\|N\|N/A
3.11	72	\|(% colspan="6" %)Integrations
3.20	73	\|A/V Integration: API\|Y\|Y\|SHOWRUNNER™: Y
	74	Floor Hub: Limited\|Limited\|N/A
	75	\|A/V Integration: Crestron EISC\|Y\|Y\|SHOWRUNNER™: Y
	76	Floor Hub: N\|N\|N/A
	77	\|A/V Integration: RS-232\|Y\|Y\|(((
	78	SHOWRUNNER™: Y
	79	Floor Hub: AVBRIDGE per Area
	80	)))\|AVBRIDGE per Area\|N/A
3.11	81	\|BACNET\|Y, SHOWRUNNER™ and Crestron Licenses Needed\|Y, SHOWRUNNER™ and Crestron Licenses Needed\|(((
	82	SHOWRUNNER™: SHOWRUNNER™ and Crestron Licenses Needed
	83	Floor Hub: Y
3.13	84	)))\|Y\|N/A
3.20	85	\|BACNET Features\|(((
	86	Per Area Status:
	87	Active Scene
	88	Occupied
	89	Occupancy Enabled
	90	Individual Load Level
	91	Photocell Level (per Photocell)
3.36	92	Plug Loads Enabled
3.20	93
	94	System:
	95	Demand Response Enabled
	96	System Wide Override (Panic/Emergency)
3.36	97
	98	~* More Features added upon request
3.20	99	)))\|See list for SHOWRUNNER™ Total Control\|(((
	100	SHOWRUNNER™: See list for SHOWRUNNER™ Total Control
	101	Floor Hub: See list for ZUM-FLOOR-HUB
	102	)))\|(((
	103	Per Room Status:
	104	Online
	105	On
	106	Occupied
	107	Daylighting Active
	108	Device Battery is Low
	109	Plug Loads Enabled
	110	Occupancy Sensor Enabled
	111	Current Daylight Level
	112	Active Scene
	113	\\System:
	114	Demand Response Enabled
	115	)))\|N/A
3.31	116	\|BACNET Settings Scope
	117	(What Points are Exposed)\|Per Area\|Per Area\|(((
3.13	118	SHOWRUNNER™: Per Area
	119	Floor Hub: Global
	120	)))\|Global\|N/A
3.31	121	\|BACNET Points Supported\|Depends on Crestron License and Hardware\|Depends on Crestron License and Hardware\|SHOWRUNNER™: Depends on Crestron License and Hardware
	122	Floor Hub: 1000\|1000\|N/A
3.20	123	\|Crestron Fusion\|Y\|Y\|(((
	124	SHOWRUNNER™: Y
	125	Floor Hub: N
	126	)))\|N\|N/A
3.24	127	\|Export to Zūm Floor Hub\|Y, Licensed\|Y, Licensed\|SHOWRUNNER™: Y, Licensed\|N/A\|N/A
3.31	128	\|GLPAC\|Y\|Y\|SHOWRUNNER™: Y
	129	Floor Hub: Via SHOWRUNNER™\|N\|N/A
	130	\|System to System Link\|Y\|Y\|(((
	131	SHOWRUNNER™: Y
	132	Floor Hub: N
	133	)))\|N\|N/A
29.1	134	\|Minimum NETBRIDGE Firmware\|v1.13.0020 (PUF Zum MESHNET v1.07.16)\|v1.010\|N/A\|See Crestron\|See Crestron
	135	\|Minimum Gateway Firmware\|v1.4469.00022\|N/A\|N/A\|See Crestron\|See Crestron
18.1	136	\|Minimum SHOWRUNNER™ Version\|2.198\|2.198\|N/A\|N/A\|N/A
11.1	137
24.1	138	{{{* Zūm Setup App works as long as the NETBRIDGE is physically near the iOS/Android device running the Zūm Setup App.
	139	** Fade time is automatically applied if scene is set longer than 1 second. Must be triggered from SHOWRUNNER™, cannot be triggered from Zūm keypad with current firmware (as of April 2020).
	140	*** Zūm wireless does not support direct coupling of fade times and the behavior is different internally within the dimmer versus other Crestron products. Raise/Lower level accuracy is not guaranteed. For best performance when settings scenes, set the slider manually which will send exact levels to the dimmer.
	141	**** Zūm wireless scenes cannot presently be read on command. Scenes should be created and saved from SHOWRUNNER™ directly. Saved scenes are stored directly on the Zūm wireless dimmer and in ShowRunner. ShowRunner will query the NETBRIDGE after scene recall and attempt to build scene information but operations are done one at a time.
31.1	142	***** Zūm wireless real time load status is not available. Any changes to loads performed using the raise/lower functions in room will not be propagated back to ShowRunner. Levels set by the daylight sensor with daylighting enabled will not be reported by ShowRunner. Sometimes delays in sending load levels occur. Feature is primarily intended for remotely setting scenes.
32.1	143	****** Zūm wireless does not support a true override but ShowRunner will disable keypads and occupancy sensors and recall scene 15. The occupancy sensor enabled state and current scene will be remembered and recalled when leaving occupancy mode.
27.1	144	}}}
21.1	145
23.1	146	{{id name="caveats"/}}
24.1	147
17.1	148	==== Caveats ====
11.1	149
24.1	150	* Consult Chief Integrations to verify sequence of operations if there are any concerns. Zum wireless is not a direct replacement for Crestron wired and infiNET EX wireless products.
17.1	151	* Zum Wireless has an internal rate limit that will shutdown communication if a number of commands are received in a short period of time. This can be seen when repeatedly pressing buttons on a keypad as well as repeatedly triggering actions from ShowRunner.
	152	* Raise/Lower operations from ShowRunner cannot track directly with the load response, see ~~* above. ShowRunner will poll the NETBRIDGE for current levels ~~3 seconds after the raise/lower is stopped to obtain current load levels.
	153	* Lower operations can turn the load off. The load will not come on with a raise. This is a firmware behavior in the Zum hardware.
	154	* Wireless control presents some additional latency possibilities. Commands required to provide full functionality (load control/raise/lower) with Zum wireless are more intensive than traditional Crestron hardware and may impact performance under heavy load. Local operation of the Zum wireless room is not impacted.
19.1	155	* Real time load status is not available. Any changes to loads performed using the raise/lower functions in room will not be propagated back to ShowRunner. Levels set by the daylight sensor with daylighting enabled will not be reported by ShowRunner.
26.1	156	* Keypad behaviors cannot be modified in ShowRunner. Some modifications are permitted within the Zum app. Custom keypads can be implemented using the AVBRIDGE connected to the system via a serial port, Zum requires an AV specific keypad for this purpose.
	157	* Zum Partition Sensors do not report back to the system and cannot be used to handle room divide/combine logic externally to the linked Zum rooms.
19.1	158	* Off Scene cannot be saved and is always room Off
	159	* Scenes 1 through 16 are supported and may be modified and saved.
	160	* Scenes with fade times greater than 1 second will result in loads being commanded individual from ShowRunner and may not be in sync depending on load quantity, RF gateway load, and RF signal integrity. Zum hardware does not support a fade time as part of the Scene setting. Fade times must be commanded from ShowRunner. Scene fade times will be ignored when scenes are activated by Zum keypads or internal occupancy logic.
	161	* Saving scenes from ShowRunner captures the levels set in ShowRunner at the time of the save. ShowRunner will attempt to learn scenes as they are recalled.
	162	* Override/Override Level features are not supported
	163	* Load disable is not supported
	164	* After hours logic is not supported
	165	* Blink before timeout is not supported
	166	* CCT control is presently not supported (ZUMMESH-JBOX-DALI support may be available in the future)
	167	* RGB loads are not supported
26.1	168	* Minimum/Maximum Levels are not supported when loads are being recalled locally. ShowRunner will honor them when control occurs from ShowRunner except for raise/lower which is performed on hardware.
19.1	169	* Dimming curves are not supported when loads are being recalled locally. Use Zum app to adjust dimming curves if necessary. Recommended to leave ShowRunner dimming curve set to "Unaffected".
	170	* BACNET support requires a processor hardware license and ShowRunner BACNET license. BACNET point availability can be configured per Area.
26.1	171	* Chief Integrations recommends one 4-series (preferred) or 3-series processor per building floor at a minimum.
19.1	172	* Zummesh and infiNET EX devices are not officially supported on the same gateway, discuss with Crestron if needing both.
17.1	173
15.1	174	(% id="HTopologies" %)
11.1	175	==== Topologies ====
	176
15.1	177	(% class="box" %)
	178	(((
11.1	179	SHOWRUNNER™ Total Control
10.1	180	[[image:ZumSr\@2x.png\|\|alt="Zum SHOWRUNNER™ Total Control Topology"]]
15.1	181	)))
3.11	182
15.1	183	(% class="box" %)
	184	(((
11.1	185	SHOWRUNNER™ + AVBRIDGE + Serial Port
10.1	186	[[image:ZumAvbSr\@2x.png\|\|alt="Zum AVBRIDGE + SHOWRUNNER™ Topology"]]
15.1	187	)))
10.1	188
15.1	189	(% class="box" %)
	190	(((
11.1	191	SHOWRUNNER™ (External Room Export) + ZUM-FLOOR-HUB (Mirror Driver)
10.1	192	[[image:ZumFhSr\@2x.png\|\|alt="Zum Floor Hub + SHOWRUNNER™ Topology"]]
15.1	193	)))
10.1	194
15.1	195	(% class="box" %)
	196	(((
11.1	197	ZUM-FLOOR-HUB Only
15.1	198	[[image:ZumFh\@2x.png\|\|alt="Zum Floor Hub Topology"]]
	199	)))
11.1	200
15.1	201	(% class="box" %)
	202	(((
11.1	203	Zūm iOS/Android Setup App
	204	[[image:ZumApp\@2x.png\|\|alt="Zum App Topology"]]
15.1	205	)))