Summary

• Page properties (1 modified, 0 added, 0 removed)

Details

Page properties

Content

...	...	@@ -29,7 +29,7 @@
29	29	|Scene Recall|Y ~*~*~*~*|Y ~*~*~*~*|Y|Y|Y
30	30	|Override Fade Time for Scene Recall ~*~*|Y|N|N|N|N
31	31	|Scene Save|Y ~*~*~*~*|Y ~*~*~*~*|N|N|Y
32		-|Load Control|Y ~*~**|Y ~*~**|N|N|Y
	32	+|Load Control|Y ~*~**/~*~*~*~**|Y ~*~**|N|N|Y
33	33	|Demand Response|Y|N|Y, separate triggers for SHOWRUNNER™ and ZUM-FLOOR-HUB required|Y|N
34	34	|Enable/Disable Occupancy|Y|Y|Y, from Floor Hub|Y|Y
35	35	|Override Occupancy Logic|Y|Y|N|N|N
...	...	@@ -134,6 +134,8 @@
134	134	** Fade time is automatically applied if scene is set longer than 1 second. Must be triggered from SHOWRUNNER™, cannot be triggered from Zūm keypad with current firmware (as of April 2020).
135	135	*** Zūm wireless does not support direct coupling of fade times and the behavior is different internally within the dimmer versus other Crestron products. Raise/Lower level accuracy is not guaranteed. For best performance when settings scenes, set the slider manually which will send exact levels to the dimmer.
136	136	**** Zūm wireless scenes cannot presently be read on command. Scenes should be created and saved from SHOWRUNNER™ directly. Saved scenes are stored directly on the Zūm wireless dimmer and in ShowRunner. ShowRunner will query the NETBRIDGE after scene recall and attempt to build scene information but operations are done one at a time.
	137	+***** Zūm wireless real time load status is not available.  Any changes to loads performed using the raise/lower functions in room will not be propagated back to ShowRunner.  Levels set by the daylight sensor with daylighting enabled will not be reported by ShowRunner.
	138	+
137	137	}}}
138	138
139	139	==== Caveats ====