Changes for page Crestron Zūm Wireless

Last modified by Scott Kohlmann on 2023/04/20 22:28
From version 1.1 >
edited by Mark Kohlmann
on 2020/04/14 17:12
To version < 1.2 >
edited by Mark Kohlmann
on 2020/04/14 17:37
>
Change comment: There is no comment for this version

Summary

Details

Page properties
Content
... ... @@ -9,19 +9,31 @@
9 9  ==== Feature Matrix ====
10 10  
11 11  |=Feature|=SHOWRUNNER™ Total Control|=SHOWRUNNER™ + AVBRIDGE + Serial Port|=SHOWRUNNER™ + ZUM-FLOOR-HUB|=ZUM-FLOOR-HUB Only|=Zūm iOS/Android Setup App*
12 -|**Hardware Requirements**|-|-|-|-|-
12 +|(% colspan="6" %)**Hardware Requirements**
13 13  |Requires JBOX and ZUMMESH-NETBRIDGE|Y|N|Y|Y|Y
14 14  |Requires ZUMMESH-GATEWAY|Y|N|Y|Y|N/A
15 15  |Requires RS-232 Serial Port per Room|N|Y|N|N|N/A
16 -| | | | | |
17 -|Web Based GUI|Crestron SmartGraphics XPanel (HTML5 UI is under development)| | | |
18 -| | | | | |
19 -| | | | | |
20 -| | | | | |
21 -| | | | | |
22 -| | | | | |
23 -| | | | | |
24 -| | | | | |
25 -| | | | | |
16 +|Physical Presence in Room to Change Scenes|N|N|Y, via Zūm Setup App|Y, via Zūm Setup App|Y
17 +|(% colspan="6" %)**User Interfaces**
18 +|Web Browser|(((
19 +Crestron SmartGraphics XPanel
20 +HTML5 UI Under Development (Q4 2020)
21 +)))|Crestron SmartGraphics XPanel
22 +HTML5 UI Under Development (Q4 2020)|SHOWRUNNER™ - Crestron SmartGraphics XPanel
23 +ZUM-FLOOR-HUB - HTML5 UI|HTML5 UI|N
24 +|iOS/Android|Y, Crestron App (Paid Upgrade)|Y, Crestron App (Paid Upgrade)|Y, Crestron App (Paid Upgrade), Limited Features for Zūm Rooms|N|Y, Physical Presence in Room Required
25 +|Touchscreens (Crestron TSW series)|Y|Y|Y, Limited Features for Zūm Rooms|N|N
26 +|(% colspan="6" %)**Features**
27 +|Scene Recall|Y|Y|Y|Y|Y
28 +|Override Fade Time for Scene Recall~*~*|Y|N|N|N|N
29 +|Scene Save|Y|Y|N|N|Y
30 +|Load Control|Y|Y|N|N|Y
31 +|Demand Response|Y|N|Y, separate triggers for SHOWRUNNER™ and ZUM-FLOOR-HUB required|Y|N
32 +|Enable/Disable Occupancy|Y|Y|Y, from Floor Hub|Y|Y
33 +|Override Occupancy Logic|Y|Y|N|N|N
34 +|Plug Load On/Off|Y| | | |
35 +|Integration with Non-Zūm Hardware|Y|Y|N|N|N
36 +|Custom Keypad Programming| | | | |
26 26  
27 -##* Zūm Setup App works as long as the NETBRIDGE is physical near the iOS/Android device running the Zūm Setup App.##
38 +##* Zūm Setup App works as long as the NETBRIDGE is physically near the iOS/Android device running the Zūm Setup App.##
39 +##~*~* Fade time is automatically applied if scene is set longer than 1 second.  Must be triggered from SHOWRUNNER™, cannot be triggered from Zūm keypad with current firmware (Apr 2020).##

Navigation