Summary

• Page properties (1 modified, 0 added, 0 removed)

Details

Page properties

Content

...	...	@@ -15,7 +15,7 @@
15	15	|Requires ZUMMESH-GATEWAY|Y|N|Y|Y|N/A
16	16	|Requires Dedicated RS-232 Serial Port per Room|N|Y|N|N|N/A
17	17	|Requires 3 or 4-Series Control System|Y|Y|Y|N|N/A
18		-|Physical Presence in Room to Change Scenes|N|N|Y, via Zūm Setup App|Y, via Zūm Setup App|Y
	18	+|Requires Physical Presence in Room to Change Scenes|N|N|Y, via Zūm Setup App|Y, via Zūm Setup App|Y
19	19	|(% colspan="6" %)**User Interfaces**
20	20	|Web Browser|(((
21	21	Crestron SmartGraphics XPanel
...	...	@@ -26,10 +26,10 @@
26	26	|iOS/Android|Y, Crestron App (Paid Upgrade)|Y, Crestron App (Paid Upgrade)|Y, Crestron App (Paid Upgrade), Limited Features for Zūm Rooms|N|Y*
27	27	|Touchscreens (Crestron TSW series)|Y|Y|Y, Limited Features for Zūm Rooms|N|N
28	28	|(% colspan="6" %)**Features**
29		-|Scene Recall|Y|Y|Y|Y|Y
30		-|Override Fade Time for Scene Recall~*~*|Y|N|N|N|N
31		-|Scene Save|Y|Y|N|N|Y
32		-|Load Control|Y|Y|N|N|Y
	29	+|Scene Recall|Y ~*~*~*~*|Y ~*~*~*~*|Y|Y|Y
	30	+|Override Fade Time for Scene Recall ~*~*|Y|N|N|N|N
	31	+|Scene Save|Y ~*~*~*~*|Y ~*~*~*~*|N|N|Y
	32	+|Load Control|Y ~*~**|Y ~*~**|N|N|Y
33	33	|Demand Response|Y|N|Y, separate triggers for SHOWRUNNER™ and ZUM-FLOOR-HUB required|Y|N
34	34	|Enable/Disable Occupancy|Y|Y|Y, from Floor Hub|Y|Y
35	35	|Override Occupancy Logic|Y|Y|N|N|N
...	...	@@ -127,8 +127,11 @@
127	127	Floor Hub: N
128	128	)))|N|N/A
129	129
130		-##* Zūm Setup App works as long as the NETBRIDGE is physically near the iOS/Android device running the Zūm Setup App.##
131		-##~*~* Fade time is automatically applied if scene is set longer than 1 second.  Must be triggered from SHOWRUNNER™, cannot be triggered from Zūm keypad with current firmware (as of April 2020).##
	130	+{{{* Zūm Setup App works as long as the NETBRIDGE is physically near the iOS/Android device running the Zūm Setup App.
	131	+** Fade time is automatically applied if scene is set longer than 1 second. Must be triggered from SHOWRUNNER™, cannot be triggered from Zūm keypad with current firmware (as of April 2020).
	132	+*** Zūm wireless does not support direct coupling of fade times and the behavior is different internally within the dimmer versus other Crestron products. Raise/Lower level accuracy is not guaranteed. For best performance when settings scenes, set the slider manually which will send exact levels to the dimmer.
	133	+**** Zūm wireless scenes cannot presently be read. Scenes should be created and saved from SHOWRUNNER™ directly. Saved scenes are stored directly on the Zūm wireless dimmer.
	134	+}}}
132	132
133	133
134	134	(% id="HTopologies" %)