Summary

• Page properties (1 modified, 0 added, 0 removed)

Details

Page properties

Content

...	...	@@ -33,6 +33,7 @@
33	33	|Demand Response|Y|N|Y, separate triggers for SHOWRUNNER™ and ZUM-FLOOR-HUB required|Y|N
34	34	|Enable/Disable Occupancy|Y|Y|Y, from Floor Hub|Y|Y
35	35	|Override Occupancy Logic|Y|Y|N|N|N
	36	+|Override|Y~*~*~*~*~*~*|N|Scene Recall only via ShowRunner|N|N/A
36	36	|Plug Load On/Off|Y|Y|Y|Y|By Hardware
37	37	|Integration with Non-Zūm Crestron Hardware|Y|Y|N|N|N
38	38	|Custom Zūm Keypad Programming|N|Y, Zūm AV Keypad Only|N|N|Y, within the limits of the hardware
...	...	@@ -134,7 +134,9 @@
134	134	** Fade time is automatically applied if scene is set longer than 1 second. Must be triggered from SHOWRUNNER™, cannot be triggered from Zūm keypad with current firmware (as of April 2020).
135	135	*** Zūm wireless does not support direct coupling of fade times and the behavior is different internally within the dimmer versus other Crestron products. Raise/Lower level accuracy is not guaranteed. For best performance when settings scenes, set the slider manually which will send exact levels to the dimmer.
136	136	**** Zūm wireless scenes cannot presently be read on command. Scenes should be created and saved from SHOWRUNNER™ directly. Saved scenes are stored directly on the Zūm wireless dimmer and in ShowRunner. ShowRunner will query the NETBRIDGE after scene recall and attempt to build scene information but operations are done one at a time.
137		-***** Zūm wireless real time load status is not available.  Any changes to loads performed using the raise/lower functions in room will not be propagated back to ShowRunner.  Levels set by the daylight sensor with daylighting enabled will not be reported by ShowRunner. }}}
	138	+***** Zūm wireless real time load status is not available.  Any changes to loads performed using the raise/lower functions in room will not be propagated back to ShowRunner.  Levels set by the daylight sensor with daylighting enabled will not be reported by ShowRunner.
	139	+****** Zūm wireless does not support a true override but ShowRunner will disable keypads and occupancy sensors.
	140	+}}}
138	138
139	139	{{id name="caveats"/}}
140	140