Wiki source code of Hardware Requirements and Supported Hardware
Last modified by Scott Kohlmann on 2023/04/21 15:36
Hide last authors
| author | version | line-number | content |
|---|---|---|---|
 |
25.1 | 1 | ShowRunnerCLC™ runs on Crestron 3-series and 4-series control systems. |
| |
1.1 | 2 | |
| 3 | |||
| 4 | === Minimum Requirements === | ||
| 5 | |||
| |
16.1 | 6 | * Dedicated 3-series (DIN-AP3/CP3/CP3N/AV3/PRO3/RMC3) or 4-series control system. Running other programs on the processor is not recommended. VC-4 is also supported. |
| |
4.1 | 7 | * Due to hardware/firmware differences the MC3 is not recommended and has not been tested. |
| |
1.1 | 8 | |
| 9 | === Supported Hardware === | ||
| 10 | |||
| |
25.1 | 11 | ShowRunnerCLC™ supports a large collection of Crestron hardware and lighting related products. |
| |
1.1 | 12 | |
| |
16.1 | 13 | * Cresnet Bridges: CAEN-BLOCK-CENCN-2-POE/DIN-CENCN-2(-POE)/CSA-PWS10S-HUB-ENET/ZUMNET-JBOX |
| |
1.1 | 14 | * Lighting Controllers: |
| |
15.1 | 15 | ** Crestron CLS-C6 (Scene Recall/Load Control) |
| 16 | ** Crestron CLF/CLFI | ||
| 17 | ** Crestron CLW-Series: CLW-DELVEX-E, CLW-DELVEX-P, CLW-DIMEX-E, CLW-DIMEX-P, CLW-DIMFLVEX-P, CLW-DIMSWEX-E, CLW-DIMSWEX-P, CLW-LDIMEX1/2, CLW-LSWEX1/2 | ||
| |
1.1 | 18 | ** Crestron CLX-Series: CLX-1DELV4, CLX-1DIM4, CLX-1DIMU4, CLX-1DIMU4-HP, CLX-1DIM8, CLX-2DIM8, CLX-2DIMU8, CLX-2DIM2, CLX-2DIMFLV8, CLX-4HSW4, CLX-1FAN4 (As a load) |
| |
24.1 | 19 | ** Crestron DIN-Series: DIN-DALI-2, DIN-AO8, DIN-1DIM4, DIN-1DIMU4, DIN-4DIMLV4, DIN-8SW8, DIN-8SW8-I, DIN-2LEDPWM8, DIN-IO8 |
| |
15.1 | 20 | ** Crestron GL-CAEN (See Crestron CLX) |
| |
1.1 | 21 | ** Crestron GL-EXP-Series: GL-EXP-DIMU-CN, GL-EXP-DIMFDB-CN, GL-EXP-DIMFLV-CN, GL-EXP-SWCN |
| 22 | ** Crestron GLPP-Series: GLPP-DIMFLVCN-PM, GLPP-1DIMFLV(2|3)CN-PM, GLPP-SWCN, GLPP-1SW(2|3)CN | ||
| 23 | ** Crestron GLX-Series: GLX-DIM6, GLX-DIMFLV8, GLX-HSW8 | ||
| 24 | ** Crestron GLXP-Series: GLXP-DIMFLV8, GLXP-HSW12, GLXP-HSW8, GLXP-SW10, GLXP-SW16, GLXX-2DIM8, GLXX-CTRL | ||
| 25 | ** Crestron GLPAC-Series (via EISC): 4 or 8 channel, supports GLPAC Occupancy and Photocell inputs, and locally attached Cresnet expansion modules | ||
| 26 | ** Crestron GL-IPAC (via EISC): 8 channel, supports local Occupancy and Photocell inputs, and locally attached Cresnet expansion modules | ||
| |
16.1 | 27 | ** Crestron HZ-*EX Series |
| |
1.1 | 28 | ** Crestron EISC: Loads directly attached to an EISC with RCB support (3-series or classic) |
| |
15.1 | 29 | ** Crestron Relay: Any low voltage Crestron relay |
| |
24.1 | 30 | ** Crestron Versiport |
| |
1.1 | 31 | ** Crestron ZUMMESH Wireless: Entire Zum Wireless product line with direct load control, occupancy, photocell via ZUMMESH-NETBRIDGE |
| 32 | ** Crestron ZUMMESH-AVBRIDGE (via Serial Port): Direct Load Control, Keypad, Occupancy, Photocell | ||
| |
9.1 | 33 | ** Crestron Zum Wired NET/LINK controllers and keypads |
| |
1.1 | 34 | ** DMX: sACN, Art-Net (RDM Addressing Supported), Pharos LPC Series (Fixture/Group Control and Timeline Playback) |
| |
15.1 | 35 | ** 3rd Party |
| 36 | *** BACnet: Remote BACnet load | ||
| |
24.1 | 37 | *** ETC: Paradigm PSAP |
| |
15.1 | 38 | *** Lutron: Integration Protocol Loads and Areas via RS-232 or IP |
| 39 | *** Philips iPlayer3: Master Intensity and Show Playback | ||
| |
24.1 | 40 | *** WTEC SmartDirector/SmartEngine: Locations as loads or area and Fixtures as loads, virtual load tracking |
| |
1.1 | 41 | * Keypads |
| 42 | ** C2N-CBD Series | ||
| |
6.1 | 43 | ** C2N-CBF Series |
| |
1.1 | 44 | ** C2N-LCDB3 |
| |
6.1 | 45 | ** C2NI-CB |
| 46 | ** CNX-Bx Series | ||
| |
1.1 | 47 | ** CLW-Series |
| |
15.1 | 48 | ** CLWI-Series |
| |
13.1 | 49 | ** GLPPA-KP (KP1/KP2/KP3/KP4 are NOT supported for programming due to hardware limitation) |
| |
6.1 | 50 | ** HTT-B10EX |
| 51 | ** HTT-B2EX | ||
| |
15.1 | 52 | ** HZ-KPCN/EX |
| 53 | ** HZ-*EX Load Controllers | ||
| |
1.1 | 54 | ** INET-CBDEX |
| |
9.1 | 55 | ** ZUMLINK-KP |
| |
1.1 | 56 | ** Zum AV Keypad via AVBRIDGE |
| 57 | * Occupancy Sensors | ||
| 58 | ** Cresnet Sensors: GLS-ODT-C-CN, GLS-OIR-C-CN, GLS-OIRLCL-C-CN | ||
| |
15.1 | 59 | ** Steinel Sensors (via Contact Closure) |
| |
1.1 | 60 | ** Wireless Sensors: GLS-OIR-CSM-EX-BATT |
| |
24.1 | 61 | ** Zum Wired: ZUMLINK sensors |
| |
1.1 | 62 | ** Zum Wireless: NETBRIDGE or AVBRIDGE (via Serial Port) |
| 63 | ** Non-System: Contact Closure via GLS-SIM, C2N-CBD-P, GLPP, GLPAC/GL-IPAC, DIN-IO8, or EISC | ||
| 64 | *** Crestron NS sensors | ||
| 65 | *** Steinel | ||
| 66 | *** Third-Party Sensors | ||
| 67 | * Photocells | ||
| 68 | ** Daylight Harvesting: GLS-LOL, GLS-LCL, GLS-LCCT (not recommended for harvesting), GLS-LDL-EX-BATT, 3rd Party 0-10V Open or Closed Loop connected via GLS-SIM, C2N-CBD-P, GLS-ODT-C-CN, GLPP, GLPAC, DIN-IO8, or Processor | ||
| 69 | ** Exterior: GLS-LEXT via GLS-SIM, C2N-CBD-P, DIN-IO8, or Processor. GLS-LCCT (SolarSync) | ||
| 70 | ** SolarSync/CCT: GLS-LCCT | ||
| 71 | * Partition Sensors | ||
| 72 | ** GLS-PART-CN (Supports Sensitivity Adjustment) | ||
| 73 | ** 3rd Party via Versiport (GLS-SIM/DIN-IO8/GLPAC) | ||
| 74 | * Override Input: Keyswitches/FACP/Power Loss Sensor/Alarm/Emergency Input/Demand Response | ||
| 75 | ** Keyswitch: Maintained or Momentary via GLS-SIM, C2N-CBD-P, C2N-CBF-P, CLWI-KPLCN, HZ-KPCN, DIN-IO8, or Processor | ||
| 76 | ** External Input: Maintained (Invertable) via GLS-SIM, C2N-CBD-P, C2N-CBF-P, CLWI-KPLCN, HZ-KPCN, DIN-IO8, or Processor | ||
| |
24.1 | 77 | * HVAC |
| 78 | ** Carrier BACnet | ||
| 79 | ** Ecobee | ||
| 80 | ** Crestron CHV-TSTATEX-FCU | ||
| |
7.1 | 81 | * Shades |
| 82 | ** Crestron: C2N-SDC, CSC series, CSM/CSMI Series (QMT), Relay/Versiport, EISC | ||
| |
15.1 | 83 | ** DraperFlex: HTTP via Gateway |
| |
8.1 | 84 | ** Lutron: Sivoia QS, Quantum (Telnet/RS-232) |
| |
15.1 | 85 | ** Mecho: MechoNET (RS-232), SolarTrac4 (BACnet) |
| 86 | ** Somfy: SDN [UAI+ RS-232/Telnet | POE Gateway | RS-485], RTS (URTSII RS-232/RS-485) | ||
| |
1.1 | 87 | * User Interfaces |
| 88 | ** Crestron App - iPhone (Local control only, no setup) | ||
| 89 | ** Crestron App - iPad Landscape | ||
| 90 | ** XPanel Executable (Smart Graphics) | ||
| |
24.1 | 91 | ** showrunner™ Hub HTML5 UI (v3.0 and greater) |
| |
20.1 | 92 | ** TSW-750/752/760/770 |
| 93 | ** TSW-1050/1052/1060/1070 | ||
| 94 | ** TSW-560/570 (Local control only, no setup)* | ||
| 95 | ** TSW-560P/570P (Local control only, no setup)* | ||
| |
24.1 | 96 | * Integration Interfaces |
| 97 | ** Crestron Serial Port: Processor, C2N-IO, CEN-IO-COM, INET-IOEX-IRCOM | ||
| |
20.1 | 98 | |
| 99 | *TSW 570 UI: No setup option, only splash and area select/control | ||
| 100 | |||
| 101 | [[image:MicrosoftTeams-image316c8d50d322901fc07d30c8922806254932f267ae5a223d5e797018dcf331fb.png||height="422" width="750"]] | ||
| 102 | |||
| 103 | |||
| 104 | |||
| 105 | *TSW 570P: Vertical sliders with horizontal scrolling | ||
| 106 | |||
| 107 | [[image:MicrosoftTeams-image3e8f52a09e1ed115f0557f825fe3c151f77c2079e13fc1d711e582028891ca61.png||height="750" width="421"]] | ||
| 108 | |||
| 109 |