Licensing tutorial:

Note: Please use Chrome or Firefox to download the License from https://portal.chiefintegrations.com.  Edge and Internet Explorer do not work properly.

https://www.youtube.com/watch?v=H8CLZ7bp0eI

Pre-Requisites

• VC-4 must have an SSL certificate

Program Install

• Download CI_ShowRunner_vx.xx.cpz and Redirect.zip from the VC-4 folder on the ShowRunnerCLC™ releases site
• Connect to the VC-4 server https://(Your_VC-4_IPAddress)/VirtualControl/config/settings/
• Load the Program
  • Go to the Settings tab
  • Go to the Program Library section
  • Add Program button
    • Step 1 of 2
      • Name: showrunner
      • Program File: Select ShowRunnerLoadHelper.cpz
        
      • Hit Next >
    • Step 2 of 2
      • Configuration Pages: Select Redirect.zip
        
• Navigate to the "Device Info" section under the "Status Tab"
  • Record the serial number
• Create a new room.  You'll need the ROOM ID and Room Name for the showrunner license.

Accessing the ShowRunnerHUB™ Web UI

Instead, you must add "/cws/showrunner/app/" after the IP address in order to access the Web UI (e.g. https://vc-4ip/VirtualControl/Rooms/ROOMNAME/cws/showrunner/app/) DO NOT OMIT THE LAST "/"

VC-4 Currently does NOT serve the XPANEL:
The XPanel does not launch from the ShowRunnerHUB webpage. To access the XPanel, extract the VTZ file from the ShowRunnerCLC™ puf file and launch. Select Options>Host Settings and input the Host IP, IPID, Port 41794, check SSL, enter the Room ID, and Open. Type in the username and password (if applicable) and wait for the XPanel to connect.