Skip to Content
Version 3.1 by Mark Kohlmann on 2020/04/06 17:50
Show last authors
1 SHOWRUNNER™ runs on Crestron 3-series and 4-series control systems.
2
3
4 === Minimum Requirements ===
5
6 * Dedicated 3-series (DIN-AP3/CP3/CP3N/AV3/PRO3/RMC3) or 4-series control system.  Running other programs on the processor is not recommended.
7
8 === Supported Hardware ===
9
10 SHOWRUNNER™ supports a large collection of Crestron hardware and lighting related products.
11
12 * Cresnet Bridges: CAEN-BLOCK-CENCN-2-POE/DIN-CENCN-2(-POE)/CSA-PWS10S-HUB-ENET
13 * Lighting Controllers:
14 ** Crestron CLX-Series: CLX-1DELV4, CLX-1DIM4, CLX-1DIMU4, CLX-1DIMU4-HP, CLX-1DIM8, CLX-2DIM8, CLX-2DIMU8, CLX-2DIM2, CLX-2DIMFLV8, CLX-4HSW4, CLX-1FAN4 (As a load)
15 ** Crestron DIN-Series: DIN-DALI-2, DIN-AO8, DIN-1DIM4, DIN-1DIMU4, DIN-4DIMLV4, DIN-8SW8, DIN-8SW8-I, DIN-2LEDPWM8
16 ** Crestron GL-EXP-Series: GL-EXP-DIMU-CN, GL-EXP-DIMFDB-CN, GL-EXP-DIMFLV-CN, GL-EXP-SWCN
17 ** Crestron GLPP-Series: GLPP-DIMFLVCN-PM, GLPP-1DIMFLV(2|3)CN-PM, GLPP-SWCN, GLPP-1SW(2|3)CN
18 ** Crestron GLX-Series: GLX-DIM6, GLX-DIMFLV8, GLX-HSW8
19 ** Crestron GLXP-Series: GLXP-DIMFLV8, GLXP-HSW12, GLXP-HSW8, GLXP-SW10, GLXP-SW16, GLXX-2DIM8, GLXX-CTRL
20 ** Crestron CLS-C6 (Scene Recall/Load Control)
21 ** Crestron CLW-Series: CLW-DELVEX-E, CLW-DELVEX-P, CLW-DIMEX-E, CLW-DIMEX-P, CLW-DIMFLVEX-P, CLW-DIMSWEX-E, CLW-DIMSWEX-P, CLW-LDIMEX1/2, CLW-LSWEX1/2
22 ** Crestron GLPAC-Series (via EISC): 4 or 8 channel, supports GLPAC Occupancy and Photocell inputs, and locally attached Cresnet expansion modules
23 ** Crestron GL-IPAC (via EISC): 8 channel, supports local Occupancy and Photocell inputs, and locally attached Cresnet expansion modules
24 ** Crestron EISC: Loads directly attached to an EISC with RCB support (3-series or classic)
25 ** Crestron ZUMMESH Wireless: Entire Zum Wireless product line with direct load control, occupancy, photocell via ZUMMESH-NETBRIDGE
26 ** Crestron ZUMMESH-AVBRIDGE (via Serial Port): Direct Load Control, Keypad, Occupancy, Photocell
27 ** DMX: sACN, Art-Net (RDM Addressing Supported), Pharos LPC Series (Fixture/Group Control and Timeline Playback)
28 * Keypads
29 ** C2N-CBD Series
30 ** C2N-LCDB3
31 ** CLW-Series
32 ** GLPPA-KP
33 ** HZ-KPCN
34 ** INET-CBDEX
35 ** Zum AV Keypad via AVBRIDGE
36 * Occupancy Sensors
37 ** Cresnet Sensors: GLS-ODT-C-CN, GLS-OIR-C-CN, GLS-OIRLCL-C-CN
38 ** Wireless Sensors: GLS-OIR-CSM-EX-BATT
39 ** Zum Wireless: NETBRIDGE or AVBRIDGE (via Serial Port)
40 ** Non-System: Contact Closure via GLS-SIM, C2N-CBD-P, GLPP, GLPAC/GL-IPAC, DIN-IO8, or EISC
41 *** Crestron NS sensors
42 *** Steinel
43 *** Third-Party Sensors
44 * Photocells
45 ** Daylight Harvesting: GLS-LOL, GLS-LCL, GLS-LCCT (not recommended for harvesting), GLS-LDL-EX-BATT, 3rd Party 0-10V Open or Closed Loop connected via GLS-SIM, C2N-CBD-P, GLS-ODT-C-CN, GLPP, GLPAC, DIN-IO8, or Processor
46 ** Exterior: GLS-LEXT via GLS-SIM, C2N-CBD-P, DIN-IO8, or Processor. GLS-LCCT (SolarSync)
47 ** SolarSync/CCT: GLS-LCCT
48 * Partition Sensors
49 ** GLS-PART-CN (Supports Sensitivity Adjustment)
50 ** 3rd Party via Versiport (GLS-SIM/DIN-IO8/GLPAC)
51 * Override Input: ​Keyswitches/FACP/Power Loss Sensor/Alarm/Emergency Input/Demand Response
52 ** Keyswitch: Maintained or Momentary via GLS-SIM, C2N-CBD-P, C2N-CBF-P, CLWI-KPLCN, HZ-KPCN, DIN-IO8, or Processor
53 ** External Input: Maintained (Invertable) via GLS-SIM, C2N-CBD-P, C2N-CBF-P, CLWI-KPLCN, HZ-KPCN, DIN-IO8, or Processor
54 * User Interfaces
55 ** TSW-560 (Local control only, no setup)
56 ** TSW-560P (Local control only, no setup)
57 ** TSW-750/752/760
58 ** TSW-1050/1052/1060
59 ** Crestron App - iPhone (Local control only, no setup)
60 ** Crestron App - iPad Landscape
61 ** XPanel Web (Smart Graphics)
62 ** XPanel Executable (Smart Graphics)