Hardware Requirements and Supported Hardware

SHOWRUNNER™ runs on Crestron 3-series and 4-series control systems.

=== Minimum Requirements ===

* Dedicated 3-series (DIN-AP3/CP3/CP3N/AV3/PRO3/RMC3) or 4-series control system. Running other programs on the processor is not recommended. VC-4 is also supported.

7

* Due to hardware/firmware differences the MC3 is not recommended and has not been tested.

8

9

=== Supported Hardware ===

10

11

SHOWRUNNER™ supports a large collection of Crestron hardware and lighting related products.

12

13

* Cresnet Bridges: CAEN-BLOCK-CENCN-2-POE/DIN-CENCN-2(-POE)/CSA-PWS10S-HUB-ENET/ZUMNET-JBOX

14

* Lighting Controllers:

15

** Crestron CLS-C6 (Scene Recall/Load Control)

16

** Crestron CLF/CLFI

17

** Crestron CLW-Series: CLW-DELVEX-E, CLW-DELVEX-P, CLW-DIMEX-E, CLW-DIMEX-P, CLW-DIMFLVEX-P, CLW-DIMSWEX-E, CLW-DIMSWEX-P, CLW-LDIMEX1/2, CLW-LSWEX1/2

18

** Crestron CLX-Series: CLX-1DELV4, CLX-1DIM4, CLX-1DIMU4, CLX-1DIMU4-HP, CLX-1DIM8, CLX-2DIM8, CLX-2DIMU8, CLX-2DIM2, CLX-2DIMFLV8, CLX-4HSW4, CLX-1FAN4 (As a load)

19

** Crestron DIN-Series: DIN-DALI-2, DIN-AO8, DIN-1DIM4, DIN-1DIMU4, DIN-4DIMLV4, DIN-8SW8, DIN-8SW8-I, DIN-2LEDPWM8

20

** Crestron GL-CAEN (See Crestron CLX)

21

** Crestron GL-EXP-Series: GL-EXP-DIMU-CN, GL-EXP-DIMFDB-CN, GL-EXP-DIMFLV-CN, GL-EXP-SWCN

22

** Crestron GLPP-Series: GLPP-DIMFLVCN-PM, GLPP-1DIMFLV(2|3)CN-PM, GLPP-SWCN, GLPP-1SW(2|3)CN

23

** Crestron GLX-Series: GLX-DIM6, GLX-DIMFLV8, GLX-HSW8

24

** Crestron GLXP-Series: GLXP-DIMFLV8, GLXP-HSW12, GLXP-HSW8, GLXP-SW10, GLXP-SW16, GLXX-2DIM8, GLXX-CTRL

25

** Crestron GLPAC-Series (via EISC): 4 or 8 channel, supports GLPAC Occupancy and Photocell inputs, and locally attached Cresnet expansion modules

26

** Crestron GL-IPAC (via EISC): 8 channel, supports local Occupancy and Photocell inputs, and locally attached Cresnet expansion modules

27

** Crestron HZ-*EX Series

28

** Crestron EISC: Loads directly attached to an EISC with RCB support (3-series or classic)

29

** Crestron Relay: Any low voltage Crestron relay

30

** Crestron ZUMMESH Wireless: Entire Zum Wireless product line with direct load control, occupancy, photocell via ZUMMESH-NETBRIDGE

31

** Crestron ZUMMESH-AVBRIDGE (via Serial Port): Direct Load Control, Keypad, Occupancy, Photocell

32

** Crestron Zum Wired NET/LINK controllers and keypads

33

** DMX: sACN, Art-Net (RDM Addressing Supported), Pharos LPC Series (Fixture/Group Control and Timeline Playback)

34

** 3rd Party

35

*** BACnet: Remote BACnet load

36

*** Lutron: Integration Protocol Loads and Areas via RS-232 or IP

37

*** Philips iPlayer3: Master Intensity and Show Playback

38

*** WTEC SmartDirector/SmartEngine: Locations as loads or area and Fixtures as loads

* Keypads

** C2N-CBD Series

** C2N-CBF Series

** C2N-LCDB3

** C2NI-CB

** CNX-Bx Series

** CLW-Series

** CLWI-Series

** GLPPA-KP (KP1/KP2/KP3/KP4 are NOT supported for programming due to hardware limitation)

** HTT-B10EX

** HTT-B2EX

** HZ-KPCN/EX

** HZ-*EX Load Controllers

52

** INET-CBDEX

53

** ZUMLINK-KP

54

** Zum AV Keypad via AVBRIDGE

55

* Occupancy Sensors

56

** Cresnet Sensors: GLS-ODT-C-CN, GLS-OIR-C-CN, GLS-OIRLCL-C-CN

57

** Steinel Sensors (via Contact Closure)

58

** Wireless Sensors: GLS-OIR-CSM-EX-BATT

59

** Zum Wireless: NETBRIDGE or AVBRIDGE (via Serial Port)

60

** Non-System: Contact Closure via GLS-SIM, C2N-CBD-P, GLPP, GLPAC/GL-IPAC, DIN-IO8, or EISC

61

*** Crestron NS sensors

62

*** Steinel

63

*** Third-Party Sensors

64

* Photocells

65

** Daylight Harvesting: GLS-LOL, GLS-LCL, GLS-LCCT (not recommended for harvesting), GLS-LDL-EX-BATT, 3rd Party 0-10V Open or Closed Loop connected via GLS-SIM, C2N-CBD-P, GLS-ODT-C-CN, GLPP, GLPAC, DIN-IO8, or Processor

66

** Exterior: GLS-LEXT via GLS-SIM, C2N-CBD-P, DIN-IO8, or Processor. GLS-LCCT (SolarSync)

67

** SolarSync/CCT: GLS-LCCT

68

* Partition Sensors

69

** GLS-PART-CN (Supports Sensitivity Adjustment)

70

** 3rd Party via Versiport (GLS-SIM/DIN-IO8/GLPAC)

71

* Override Input: Keyswitches/FACP/Power Loss Sensor/Alarm/Emergency Input/Demand Response