Skip to Content

SHOWRUNNER™ Hardware Requirements and Supported Hardware

Version 1.1 by Mark Kohlmann on 2020/04/05 03:43

SHOWRUNNER™ runs on Crestron 3-series and 4-series control systems.

Minimum Requirements

  • Dedicated 3-series (DIN-AP3/CP3/CP3N/AV3/PRO3/RMC3) or 4-series control system.  Running other programs on the processor is not recommended.
  • Supported Crestron lighting hardware

Supported Hardware

SHOWRUNNER™ supports a large collection of Crestron hardware and lighting related products.

  • Cresnet Bridges: CAEN-BLOCK-CENCN-2-POE/DIN-CENCN-2(-POE)/CSA-PWS10S-HUB-ENET
  • Lighting Controllers:
    • Crestron CLX-Series: CLX-1DELV4, CLX-1DIM4, CLX-1DIMU4, CLX-1DIMU4-HP, CLX-1DIM8, CLX-2DIM8, CLX-2DIMU8, CLX-2DIM2, CLX-2DIMFLV8, CLX-4HSW4, CLX-1FAN4 (As a load)
    • Crestron DIN-Series: DIN-DALI-2, DIN-AO8, DIN-1DIM4, DIN-1DIMU4, DIN-4DIMLV4, DIN-8SW8, DIN-8SW8-I, DIN-2LEDPWM8
    • Crestron GL-EXP-Series: GL-EXP-DIMU-CN, GL-EXP-DIMFDB-CN, GL-EXP-DIMFLV-CN, GL-EXP-SWCN
    • Crestron GLPP-Series: GLPP-DIMFLVCN-PM, GLPP-1DIMFLV(2|3)CN-PM, GLPP-SWCN, GLPP-1SW(2|3)CN
    • Crestron GLX-Series: GLX-DIM6, GLX-DIMFLV8, GLX-HSW8
    • Crestron GLXP-Series: GLXP-DIMFLV8, GLXP-HSW12, GLXP-HSW8, GLXP-SW10, GLXP-SW16, GLXX-2DIM8, GLXX-CTRL
    • Crestron CLS-C6 (Scene Recall/Load Control)
    • Crestron CLW-Series: CLW-DELVEX-E, CLW-DELVEX-P, CLW-DIMEX-E, CLW-DIMEX-P, CLW-DIMFLVEX-P, CLW-DIMSWEX-E, CLW-DIMSWEX-P, CLW-LDIMEX1/2, CLW-LSWEX1/2
    • Crestron GLPAC-Series (via EISC): 4 or 8 channel, supports GLPAC Occupancy and Photocell inputs, and locally attached Cresnet expansion modules
    • Crestron GL-IPAC (via EISC): 8 channel, supports local Occupancy and Photocell inputs, and locally attached Cresnet expansion modules
    • Crestron EISC: Loads directly attached to an EISC with RCB support (3-series or classic)
    • Crestron ZUMMESH Wireless: Entire Zum Wireless product line with direct load control, occupancy, photocell via ZUMMESH-NETBRIDGE
    • Crestron ZUMMESH-AVBRIDGE (via Serial Port): Direct Load Control, Keypad, Occupancy, Photocell
    • DMX: sACN, Art-Net (RDM Addressing Supported), Pharos LPC Series (Fixture/Group Control and Timeline Playback)
  • Keypads
    • C2N-CBD Series
    • C2N-LCDB3
    • CLW-Series
    • GLPPA-KP
    • HZ-KPCN
    • INET-CBDEX
    • Zum AV Keypad via AVBRIDGE
  • Occupancy Sensors
    • Cresnet Sensors: GLS-ODT-C-CN, GLS-OIR-C-CN, GLS-OIRLCL-C-CN
    • Wireless Sensors: GLS-OIR-CSM-EX-BATT
    • Zum Wireless: NETBRIDGE or AVBRIDGE (via Serial Port)
    • Non-System: Contact Closure via GLS-SIM, C2N-CBD-P, GLPP, GLPAC/GL-IPAC, DIN-IO8, or EISC
      • Crestron NS sensors
      • Steinel
      • Third-Party Sensors
  • Photocells
    • Daylight Harvesting: GLS-LOL, GLS-LCL, GLS-LCCT (not recommended for harvesting), GLS-LDL-EX-BATT, 3rd Party 0-10V Open or Closed Loop connected via GLS-SIM, C2N-CBD-P, GLS-ODT-C-CN, GLPP, GLPAC, DIN-IO8, or Processor
    • Exterior: GLS-LEXT via GLS-SIM, C2N-CBD-P, DIN-IO8, or Processor. GLS-LCCT (SolarSync)
    • SolarSync/CCT: GLS-LCCT
  • Partition Sensors
    • GLS-PART-CN (Supports Sensitivity Adjustment)
    • 3rd Party via Versiport (GLS-SIM/DIN-IO8/GLPAC)
  • Override Input: ​Keyswitches/FACP/Power Loss Sensor/Alarm/Emergency Input/Demand Response
    • Keyswitch: Maintained or Momentary via GLS-SIM, C2N-CBD-P, C2N-CBF-P, CLWI-KPLCN, HZ-KPCN, DIN-IO8, or Processor
    • External Input: Maintained (Invertable) via GLS-SIM, C2N-CBD-P, C2N-CBF-P, CLWI-KPLCN, HZ-KPCN, DIN-IO8, or Processor
  • User Interfaces
    • TSW-560 (Local control only, no setup)
    • TSW-560P (Local control only, no setup)
    • TSW-750/752/760
    • TSW-1050/1052/1060
    • Crestron App - iPhone (Local control only, no setup)
    • Crestron App - iPad Landscape
    • XPanel Web (Smart Graphics)
    • XPanel Executable (Smart Graphics)