Skip to Content
Last modified by Scott Kohlmann on 2023/04/21 15:36
From version 3.1
edited by Mark Kohlmann
on 2020/04/06 17:50
Change comment: There is no comment for this version
To version 11.1
edited by Mark Kohlmann
on 2021/05/24 23:01
Change comment: There is no comment for this version

Summary

Details

Page properties
Title
... ... @@ -1,1 +1,1 @@
1 -SHOWRUNNER™ Hardware Requirements and Supported Hardware
1 +Hardware Requirements and Supported Hardware
Parent
... ... @@ -1,1 +1,1 @@
1 -Main.WebHome
1 +SHOWRUNNER™ User Guide & Wiki.WebHome
Author
... ... @@ -1,1 +1,1 @@
1 -XWiki.MarkKohlmann
1 +XWiki.mark\.kohlmann@chiefintegrations\.com
Content
... ... @@ -4,6 +4,7 @@
4 4  === Minimum Requirements ===
5 5  
6 6  * Dedicated 3-series (DIN-AP3/CP3/CP3N/AV3/PRO3/RMC3) or 4-series control system.  Running other programs on the processor is not recommended.
7 +* Due to hardware/firmware differences the MC3 is not recommended and has not been tested.
7 7  
8 8  === Supported Hardware ===
9 9  
... ... @@ -24,14 +24,21 @@
24 24  ** Crestron EISC: Loads directly attached to an EISC with RCB support (3-series or classic)
25 25  ** Crestron ZUMMESH Wireless: Entire Zum Wireless product line with direct load control, occupancy, photocell via ZUMMESH-NETBRIDGE
26 26  ** Crestron ZUMMESH-AVBRIDGE (via Serial Port): Direct Load Control, Keypad, Occupancy, Photocell
28 +** Crestron Zum Wired NET/LINK controllers and keypads
27 27  ** DMX: sACN, Art-Net (RDM Addressing Supported), Pharos LPC Series (Fixture/Group Control and Timeline Playback)
28 28  * Keypads
29 29  ** C2N-CBD Series
32 +** C2N-CBF Series
30 30  ** C2N-LCDB3
34 +** C2NI-CB
35 +** CNX-Bx Series
31 31  ** CLW-Series
32 -** GLPPA-KP
37 +** GLPPA-KP (KP1/KP2/KP3/KP4 not supported for programming due to hardware limitation)
38 +** HTT-B10EX
39 +** HTT-B2EX
33 33  ** HZ-KPCN
34 34  ** INET-CBDEX
42 +** ZUMLINK-KP
35 35  ** Zum AV Keypad via AVBRIDGE
36 36  * Occupancy Sensors
37 37  ** Cresnet Sensors: GLS-ODT-C-CN, GLS-OIR-C-CN, GLS-OIRLCL-C-CN
... ... @@ -51,12 +51,16 @@
51 51  * Override Input: ​Keyswitches/FACP/Power Loss Sensor/Alarm/Emergency Input/Demand Response
52 52  ** Keyswitch: Maintained or Momentary via GLS-SIM, C2N-CBD-P, C2N-CBF-P, CLWI-KPLCN, HZ-KPCN, DIN-IO8, or Processor
53 53  ** External Input: Maintained (Invertable) via GLS-SIM, C2N-CBD-P, C2N-CBF-P, CLWI-KPLCN, HZ-KPCN, DIN-IO8, or Processor
62 +* Shades
63 +** Crestron: C2N-SDC, CSC series, CSM/CSMI Series (QMT), Relay/Versiport, EISC
64 +** Lutron: Sivoia QS, Quantum (Telnet/RS-232)
65 +** Mecho: MechoNET (RS-232)
66 +** Somfy: SDN (UAI+ RS-232/Telnet), RTS (URTSII RS-232/RS-485)
54 54  * User Interfaces
55 -** TSW-560 (Local control only, no setup)
56 -** TSW-560P (Local control only, no setup)
57 -** TSW-750/752/760
58 -** TSW-1050/1052/1060
68 +** TSW-560/570 (Local control only, no setup)
69 +** TSW-560P/570P (Local control only, no setup)
70 +** TSW-750/752/760/770
71 +** TSW-1050/1052/1060/1070
59 59  ** Crestron App - iPhone (Local control only, no setup)
60 60  ** Crestron App - iPad Landscape
61 -** XPanel Web (Smart Graphics)
62 62  ** XPanel Executable (Smart Graphics)