Wiki source code of *Ethernet
Version 3.3 by Alexander Mott on 2021/12/20 23:25
Hide last authors
| author | version | line-number | content |
|---|---|---|---|
 |
3.3 | 1 | {{box title="**Contents**"}} |
| 2 | {{toc/}} | ||
| 3 | {{/box}} | ||
| 4 | |||
| |
1.1 | 5 | (% class="row" %) |
| 6 | ((( | ||
| 7 | (% class="col-xs-12 col-sm-8" %) | ||
| 8 | ((( | ||
| |
3.3 | 9 | = Ethernet Wiring = |
| |
1.1 | 10 | |
| |
3.3 | 11 | Ethernet wiring is used for various devices within a Crestron Lighting Control system, including connecting a lighting control processor to the lighting network, connecting Zūm Net devices to the lighting network, and connecting TSW touch-screen interfaces to the lighting network, among other devices. |
| |
1.1 | 12 | |
| |
3.1 | 13 | == Cabling == |
| |
1.1 | 14 | |
| |
3.3 | 15 | All cable should be at least Category 5e, if not Category 6 or Category 6a. The |
| |
1.1 | 16 | |
| |
3.1 | 17 | == Terminations == |
| |
1.1 | 18 | |
| |
3.2 | 19 | Cresnet Ethernet devices require the use of RJ-45 connectors. |
| 20 | |||
| 21 | While either T568A or T568B termination pin-out are acceptable, it is **recommended to use the T568B pin-out for all terminations.** By keeping to one standard, it is easier to stay consistent and prevent errors where the two sides of a single cable are not terminated to the same standard. | ||
| 22 | |||
| 23 | See// Figure 1 //for the T568-B pin-out. | ||
| |
1.1 | 24 | ))) |
| 25 | |||
| 26 | |||
| 27 | (% class="col-xs-12 col-sm-4" %) | ||
| 28 | ((( | ||
| 29 | [[image:Templates.Article.Template.WebHome@image1.jpg]] | ||
| 30 | //Figure 1: [[Sea>>https://commons.wikimedia.org/wiki/File:Isle_of_Icacos_II.jpg]]// | ||
| 31 | ))) | ||
| 32 | ))) |