Skip to Content

Wiki source code of *Ethernet

Version 3.3 by Alexander Mott on 2021/12/20 23:25
Show last authors
1 {{box title="**Contents**"}}
2 {{toc/}}
3 {{/box}}
4
5 (% class="row" %)
6 (((
7 (% class="col-xs-12 col-sm-8" %)
8 (((
9 = Ethernet Wiring =
10
11 Ethernet wiring is used for various devices within a Crestron Lighting Control system, including connecting a lighting control processor to the lighting network, connecting Zūm Net devices to the lighting network, and connecting TSW touch-screen interfaces to the lighting network, among other devices.
12
13 == Cabling ==
14
15 All cable should be at least Category 5e, if not Category 6 or Category 6a. The
16
17 == Terminations ==
18
19 Cresnet Ethernet devices require the use of RJ-45 connectors.
20
21 While either T568A or T568B termination pin-out are acceptable, it is **recommended to use the T568B pin-out for all terminations.** By keeping to one standard, it is easier to stay consistent and prevent errors where the two sides of a single cable are not terminated to the same standard.
22
23 See// Figure 1 //for the T568-B pin-out.
24 )))
25
26
27 (% class="col-xs-12 col-sm-4" %)
28 (((
29 [[image:Templates.Article.Template.WebHome@image1.jpg]]
30 //Figure 1: [[Sea>>https://commons.wikimedia.org/wiki/File:Isle_of_Icacos_II.jpg]]//
31 )))
32 )))