Wiki source code of Cresnet Wiring Overview
Version 21.1 by Alexander Mott on 2024/01/05 22:34
Hide last authors
author | version | line-number | content |
---|---|---|---|
![]() |
1.1 | 1 | (% class="row" %) |
2 | ((( | ||
3 | (% class="col-xs-12 col-sm-8" %) | ||
4 | ((( | ||
![]() |
20.3 | 5 | Communications between Crestron Cresnet devices occurs on the Cresnet bus. Cresnet is Crestron's proprietary 4-wire communications network that provides both 24V DC power and low-voltage, bidirectional communication that adheres to to RS-485 standards. |
![]() |
1.1 | 6 | |
![]() |
20.10 | 7 | Each job with Cresnet devices will have at least one Cresnet bus network. Every Cresnet bus network has a single //host// or //primary// device and one or more //client// or //secondary// devices (older materials may refer to hosts as //masters// and clients as //slaves//). Every Cresnet device on a Cresnet bus must be assigned a unique, one-byte hexadecimal Cresnet address. The range of available addresses is determined by the bus host: |
![]() |
20.3 | 8 | |
![]() |
20.25 | 9 | (% class="table-condensed" %) |
10 | |=(% style="width: 171px;" %)Host|=(% style="width: 96px;" %)Available Addresses|=Start|=End|=Notes | ||
11 | |(% style="width:171px" %)3-Series or | ||
12 | 4-Series processors|(% style="width:96px" %)252|03|FE|Chief Integrations has experienced significant communications slowdowns on systems with more than 100 devices, and recommends using DIN-CENCN-2(-POE) or additional processors to break up larger Cresnet bus networks | ||
13 | |(% style="width:171px" %)((( | ||
![]() |
20.15 | 14 | DIN-CENCN-2 or |
15 | DIN-CENCN-2-POE | ||
![]() |
20.25 | 16 | )))|(% style="width:96px" %)((( |
![]() |
20.14 | 17 | 25 per Net (50 total) |
18 | )))|03|1B| | ||
![]() |
20.25 | 19 | |(% style="width:171px" %)ZUMNET-JBOX-16A-LV |
20 | or ZUMNET-JBOX-DALI|(% style="width:96px" %)32|03|22|((( | ||
![]() |
20.15 | 21 | ZUMNET-JBOX local controller counts as a device; only 31 additional Zūm Link or Cresnet devices may be connected |
22 | |||
![]() |
20.14 | 23 | Zūm Link and Cresnet can be intermingled; more details are available [[here>>doc:SHOWRUNNER™ Setup Guide.Troubleshooting Guide.Troubleshooting.Zūm Wired Wiring Overview.WebHome]] |
![]() |
20.13 | 24 | ))) |
![]() |
20.9 | 25 | |
![]() |
20.10 | 26 | Power considerations also play a role in determining the number of Cresnet devices which can be supported on a Cresnet bus, however we will not cover them here due to the wide array of variables which impact power calculations and determining whether there is sufficient power for a given device. |
![]() |
20.9 | 27 | |
![]() |
12.1 | 28 | = Cabling = |
![]() |
1.1 | 29 | |
![]() |
20.6 | 30 | Cresnet cabling provides the physical infrastructure for communication between Crestron Cresnet devices and consists of a 4-wire, 2-pair cable available directly from Crestron with either plenum and non-plenum rated jackets. |
![]() |
1.1 | 31 | |
![]() |
20.8 | 32 | (% class="table-condensed" %) |
33 | |=(% style="width: 307px;" %)Pair|=(% style="width: 287px;" %)Color|=(% style="width: 380px;" %)Purpose | ||
34 | |(% colspan="1" rowspan="2" style="width:307px" %)18 AWG pair|(% style="width:287px" %)Red|(% style="width:380px" %)24 V DC Power | ||
35 | |(% style="width:287px" %)Black|(% style="width:380px" %)Common | ||
36 | |(% colspan="1" rowspan="2" style="width:307px" %)22 AWG shielded twisted pair|(% style="width:287px" %)White|(% style="width:380px" %)Data + | ||
37 | |(% style="width:287px" %)Blue|(% style="width:380px" %)Data - | ||
![]() |
20.6 | 38 | |
![]() |
20.25 | 39 | (% class="wikigeneratedid" %) |
40 | Terminations | ||
![]() |
1.1 | 41 | |
![]() |
12.1 | 42 | Lorem ipsum dolor sit amet, |
![]() |
1.1 | 43 | |
![]() |
20.2 | 44 | See //[[Figure 1>>WebHome||anchor="HFigure1"]]// for details. |
45 | See //[[Figure 2>>WebHome||anchor="HFigure2"]]// for details. | ||
46 | |||
47 | = Crestron Wiring Notes = | ||
![]() |
1.1 | 48 | |
![]() |
20.2 | 49 | Crestron includes some general Cresnet wiring guidelines in their submittals. Many of these suggestions are covered above, but we have included them here for reference: |
50 | |||
51 | [[image:1704485841724-854.png]] | ||
![]() |
1.1 | 52 | ))) |
53 | |||
54 | |||
55 | (% class="col-xs-12 col-sm-4" %) | ||
56 | ((( | ||
![]() |
13.1 | 57 | {{box title="**Contents**"}} |
58 | {{toc/}} | ||
59 | {{/box}} | ||
60 | |||
61 | (% class="wikigeneratedid" id="HFigure1" %) | ||
62 | ((( | ||
![]() |
1.1 | 63 | [[image:Templates.Article.Template.WebHome@image1.jpg]] |
64 | //Figure 1: [[Sea>>https://commons.wikimedia.org/wiki/File:Isle_of_Icacos_II.jpg]]// | ||
![]() |
13.1 | 65 | ))) |
![]() |
1.1 | 66 | |
![]() |
14.1 | 67 | (% class="wikigeneratedid" id="HFigure2" %) |
![]() |
13.1 | 68 | ((( |
![]() |
1.1 | 69 | [[image:Templates.Article.Template.WebHome@image2.jpg]] |
70 | //Figure 2: [[Waves>>https://commons.wikimedia.org/wiki/File:Culebra_-_Playa_de_Flamenco.jpg]]// | ||
71 | ))) | ||
72 | ))) | ||
![]() |
13.1 | 73 | ))) |