Cresnet Wiring Overview

1

(% class="row" %)

2

(((

3

(% class="col-xs-12 col-sm-8" %)

4

(((

5

Communications between Crestron Cresnet devices occurs on the Cresnet bus. Cresnet is Crestron's proprietary 4-wire communications network that provides both 24V DC power and low-voltage, bidirectional communication that adheres to to RS-485 standards.

6

7

Each job with Cresnet devices will have at least one Cresnet bus network. Every Cresnet bus network has a single //host// or //primary// device and one or more //client// or //secondary// devices (older materials may refer to hosts as //masters// and clients as //slaves//). Every Cresnet device on a Cresnet bus must be assigned a unique, one-byte hexadecimal Cresnet address. The range of available addresses is determined by the bus host:

8

9

(% class="table-condensed" %)

10

11

|(% style="width:171px" %)3-Series or

12

4-Series processors|(% style="width:96px" %)252|03|FE|Chief Integrations has experienced significant communications slowdowns on systems with more than 100 devices, and recommends using DIN-CENCN-2(-POE) or additional processors to break up larger Cresnet bus networks

13

|(% style="width:171px" %)(((

14

DIN-CENCN-2 or

15

DIN-CENCN-2-POE

16

)))|(% style="width:96px" %)(((

17

25 per Net (50 total)

18

)))|03|1B|

19

|(% style="width:171px" %)ZUMNET-JBOX-16A-LV

20

or ZUMNET-JBOX-DALI|(% style="width:96px" %)32|03|22|(((

21

ZUMNET-JBOX local controller counts as a device; only 31 additional Zūm Link or Cresnet devices may be connected

22

23

Zūm Link and Cresnet can be intermingled; more details are available [[here>>doc:SHOWRUNNER™ Setup Guide.Troubleshooting Guide.Troubleshooting.Zūm Wired Wiring Overview.WebHome]]

24

)))

25

26

Power considerations also play a role in determining the number of Cresnet devices which can be supported on a Cresnet bus, however we will not cover them here due to the wide array of variables which impact power calculations and determining whether there is sufficient power for a given device.

= Cabling =

Cresnet cabling provides the physical infrastructure for communication between Crestron Cresnet devices and consists of a 4-wire, 2-pair cable available directly from Crestron with either plenum and non-plenum rated jackets.

31

32

(% class="table-condensed" %)

33

|=(% style="width: 307px;" %)Pair|=(% style="width: 287px;" %)Color|=(% style="width: 380px;" %)Purpose

34

|(% colspan="1" rowspan="2" style="width:307px" %)18 AWG pair|(% style="width:287px" %)Red|(% style="width:380px" %)24 V DC Power

35

|(% style="width:287px" %)Black|(% style="width:380px" %)Common

36

|(% colspan="1" rowspan="2" style="width:307px" %)22 AWG shielded twisted pair|(% style="width:287px" %)White|(% style="width:380px" %)Data +

37

|(% style="width:287px" %)Blue|(% style="width:380px" %)Data -

38

39

(% class="wikigeneratedid" %)

40

Terminations

41

42

Lorem ipsum dolor sit amet,

43

44

See //[[Figure 1>>WebHome||anchor="HFigure1"]]// for details.

45

See //[[Figure 2>>WebHome||anchor="HFigure2"]]// for details.

46

47

= Crestron Wiring Notes =

48

49

Crestron includes some general Cresnet wiring guidelines in their submittals. Many of these suggestions are covered above, but we have included them here for reference:

50

51

[[image:1704485841724-854.png]]

)))

(% class="col-xs-12 col-sm-4" %)

56

(((

57