Skip to Content

Changes for page Legacy Hardware (Cresnet)

Last modified by Craig Lewis on 2024/12/02 14:48
From version 19.1
edited by Craig Lewis
on 2024/12/02 14:48
Change comment: There is no comment for this version
To version 11.6
edited by Craig Lewis
on 2022/08/18 16:56
Change comment: There is no comment for this version

Summary

Details

Page properties
Title
... ... @@ -1,1 +1,1 @@
1 -Legacy Hardware (Cresnet)
1 +GLPAC (Cresnet)
Parent
... ... @@ -1,1 +1,1 @@
1 -SHOWRUNNER™ Setup Guide.Troubleshooting Guide.Advanced Tools.WebHome
1 +SHOWRUNNER™ User Guide & Wiki.Troubleshooting.WebHome
Content
... ... @@ -1,4 +1,4 @@
1 -Older systems with Legacy Hardware, such as CNLDM-6 or GLPACs, wired to the processor via Cresnet can be added to ShowRunnerCLC™ by created a program for slot 2.
1 +Older systems with GLPACs wired to the processor via Cresnet can be added by created a program for slot 2.
2 2  
3 3  * Create a SIMPL windows program
4 4  * Add the GLPAC-DIMFLV8 (Cresnet) to the appropriate Cresnet IDs
... ... @@ -15,15 +15,11 @@
15 15  
16 16  [[image:1660773665229-324.png]]
17 17  
18 -* In the showrunner™ config, the lighting controller will be defined with the following settings
18 +* In the showrunner config, the lighting controller will be defined with the following settings
19 19  ** Controller Type = "3SeriesEisc"
20 20  ** ID and Device Connection Id = IP ID used
21 21  ** Properties Value = "127.0.0.2"
22 -** Loads Index for each load = the analog joins defined in the SIMPL program EISC Analog signals
22 +** Loads Index for each load = the analog joins defined in the SIMPL program EISC Analog Symbols
23 23  
24 -[[image:image-20220817145415-4.png]]
25 25  
26 -
27 -GLPACs on Cresnet directly to the processor can be added to ShowRunnerCLC™, without requiring a second programming slot, by deleting the properties lines and setting the Model to:
28 -
29 - "Model": "GLPAC-DIMFLV8_Cresnet",
25 +[[image:image-20220817145415-4.png]]