Wiki source code of Legacy Hardware (Cresnet)
Last modified by Craig Lewis on 2024/12/02 14:48
Show last authors
| author | version | line-number | content |
|---|---|---|---|
| 1 | Older systems with Legacy Hardware not in SIMPL# library, such as CNLDM-6 or GLPACs, wired to the processor via Cresnet can be added to ShowRunnerCLC™ by created a program for slot 2. | ||
| 2 | |||
| 3 | * Create a SIMPL windows program | ||
| 4 | * Add the Legacy Hardware or GLPAC-DIMFLV8 (Cresnet) to the appropriate Cresnet IDs | ||
| 5 | * Define the Level In and Level Out analog signals on the GLPAC Remote Standard Intersystem Communications | ||
| 6 | |||
| 7 | [[image:1660773651340-476.png]] | ||
| 8 | |||
| 9 | * Add a 3 Series TCP/IP Ethernet Intersystem Communications to the appropriate Ethernet ID | ||
| 10 | * In Device Settings, set the Default IP Address to 127.0.0.2 (Loop back address) | ||
| 11 | |||
| 12 | [[image:image-20220817145415-2.png]] | ||
| 13 | |||
| 14 | * Copy the GLPACs Level In and Level Out signals and paste them to the 3 Series TCP/IP Ethernet Intersystem Communications Analog signals | ||
| 15 | |||
| 16 | [[image:1660773665229-324.png]] | ||
| 17 | |||
| 18 | * In the showrunner™ config, the lighting controller will be defined with the following settings | ||
| 19 | ** Controller Type = "3SeriesEisc" | ||
| 20 | ** ID and Device Connection Id = IP ID used | ||
| 21 | ** Properties Value = "127.0.0.2" | ||
| 22 | ** Loads Index for each load = the analog joins defined in the SIMPL program EISC Analog signals | ||
| 23 | |||
| 24 | [[image:image-20220817145415-4.png]] | ||
| 25 | |||
| 26 | |||
| 27 | GLPACs on Cresnet directly to the processor can be added to ShowRunnerCLC™, without requiring a second programming slot, by deleting the properties lines and setting the Model to: | ||
| 28 | |||
| 29 | "Model": "GLPAC-DIMFLV8_Cresnet", |