Skip to Content

GLPAC (Cresnet)

Version 11.6 by Craig Lewis on 2022/08/18 16:56

Older systems with GLPACs wired to the processor via Cresnet can be added by created a program for slot 2. 

  • Create a SIMPL windows program
  • Add the GLPAC-DIMFLV8 (Cresnet) to the appropriate Cresnet IDs
  • Define the Level In and Level Out analog signals on the GLPAC Remote Standard Intersystem Communications

1660773651340-476.png

  • Add a 3 Series TCP/IP Ethernet Intersystem Communications to the appropriate Ethernet ID
  • In Device Settings, set the Default IP Address to 127.0.0.2 (Loop back address)

image-20220817145415-2.png

  • Copy the GLPACs Level In and Level Out signals and paste them to the 3 Series TCP/IP Ethernet Intersystem Communications Analog signals

1660773665229-324.png

  • In the showrunner config, the lighting controller will be defined with the following settings
    • Controller Type = "3SeriesEisc"
    • ID and Device Connection Id = IP ID used
    • Properties Value = "127.0.0.2"
    • Loads Index for each load = the analog joins defined in the SIMPL program EISC Analog Symbols

image-20220817145415-4.png