Skip to Content

Wiki source code of Custom Logo

Last modified by Austin Weygandt on 2026/04/09 19:53
Show last authors
1 {{box title="**CONTENTS**"}}
2 {{toc/}}
3 {{/box}}
4
5 (% class="row" %)
6 (((
7 = Custom Logo Guidelines =
8
9 To use a custom logo in your ShowRunnerCLC™ project, you should first create a custom logo per the following guidelines.
10
11 {{warning}}
12 Note that custom logos accessed via the Control Subnet require the processor to have a valid LAN Ip Address and SR verision 3.71+ to work. (0.0.0.0 is invalid)
13 {{/warning}}
14
15 Custom logos should have a white background and be in .png format with a resolution of 1280x800 for compatibility with the widest range of of touch screens.
16
17 * TSW-770 and TSW-1060 screens have an aspect ratio of 16:10 and a native resolution of 1280x800.
18 * TSW-1070 screens have an aspect ratio of 16:10 and a native resolution 1920x1200.
19 * TSW-760 screens have an aspect ratio of 17:10 and a native resolution of 1024x600.
20
21 = Loading a Custom Logo to the Processor =
22
23 Once a custom logo has been created, it must be loaded to the processor (not to the touchscreen itself).
24
25 * Start Crestron Toolbox and open the File Manager tool
26 * Connect to the lighting control processor that the TSW touch screen is pointed at
27 * Select "Internal Flash" from the list on the left
28 * Select "HTML" from the list on the left
29 ** 4-Series processors have a lowercase "html" folder that must be used instead: the correct folder for any processor can be identified by the presence of other ShowRunnerCLC™ files, such as "sr.html", "CI_ShowRunner_CrestronApp.zip", etc.
30 * Right-click in an empty area on the right and select "Copy File(s) From..."
31 * Select your custom logo .png file and load it to the processor
32
33 [[image:1591724546339-953.png]]
34
35 = Updating the Lighting Configuration File =
36
37 Once the logo has been loaded to the processor, it is necessary to update the lighting configuration file.
38
39 * First, pull the configuration file using either ShowRunner's File Management page (recommended), or pull it directly from the processor using Toolbox's File Manager tool. 
40 ** If using Toolbox's File Manager tool, the config will be located in one of two places:
41 "NVRAM/sr/default/SrConfig.json" for ShowRunner versions 3.011 and newer
42 "NVRAM/CiLightingConfig.json" for ShowRunner versions 3.010 and older
43 * Open the configuration file in a text editor and the locate the "CustomLogoFile" line towards the bottom of the config:
44 [[image:1591724611629-257.png]]
45 * Change the value ##null ##to the name of your custom logo file:
46 [[image:1591724595422-172.png]]
47 * Save the updated configuration file
48 * Load the updated configuration file to your processor using either ShowRunnerCLC's™ File Management page or using Toolbox
49 ** If using Toolbox, navigate to either:
50 "NVRAM/sr/default" for ShowRunnerCLC™ versions 3.011 and newer
51 "NVRAM" for ShowRunner versions 3.010 and older
52 ** Open Text Console and connect to the processor and type the## progreset## command and then press enter to restart the processor and finish loading the config
53
54 = Custom Logos on Processors with Authentication Enabled =
55
56 If your project is running on a 3-series with authentication enabled or a 4-series with user page authentication enabled, you will need to follow [[these additional steps>>doc:SHOWRUNNER™ User Guide & Wiki.SHOWRUNNER™ Appendix.Resolving Custom Logo Not Loading on Touchscreens with Authentication on processor Enabled.WebHome]].
57 )))