Wiki source code of Custom Logo
Version 11.1 by Alexander Mott on 2021/12/22 17:37
Show last authors
| author | version | line-number | content |
|---|---|---|---|
| 1 | === Custom Logo Guidelines === | ||
| 2 | |||
| 3 | To use a custom logo in your ShowRunner project, you should first create a custom logo per the following guidelines. | ||
| 4 | |||
| 5 | Custom logos should have a white background and be in .png format with a resolution of 1280x800 for compatibility with the widest range of of touch screens. | ||
| 6 | |||
| 7 | * TSW-770 and TSW-1060 screens have an aspect ratio of 16:10 and a native resolution of 1280x800. | ||
| 8 | * TSW-1070 screens have an aspect ratio of 16:10 and a native resolution 1920x1080. | ||
| 9 | * TSW-760 screens have an aspect ratio of 17:10 and a native resolution of 1024x600. | ||
| 10 | |||
| 11 | === Loading a Custom Logo to the Processor === | ||
| 12 | |||
| 13 | Once a custom logo has been created, it must be loaded to the processor (not to the touchscreen itself). | ||
| 14 | |||
| 15 | * Start Crestron Toolbox and open the File Manager tool | ||
| 16 | * Connect to the lighting control processor that the TSW touch screen is pointed at | ||
| 17 | * Select "Internal Flash" from the list on the left | ||
| 18 | * Select "HTML" from the list on the left | ||
| 19 | * Right-click in an empty area on the right and select "Copy File(s) From..." | ||
| 20 | * Select your custom logo .png file and load it to the processor | ||
| 21 | |||
| 22 | [[image:1591724546339-953.png]] | ||
| 23 | |||
| 24 | === Updating the Lighting Configuration File === | ||
| 25 | |||
| 26 | Once the logo has been loaded to the processor, it is necessary to update the lighting configuration file. | ||
| 27 | |||
| 28 | * First, pull the configuration file using either ShowRunner's File Management page (recommended), or pull it directly from the processor using Toolbox's File Manager tool. | ||
| 29 | ** If using Toolbox's File Manager tool, the config will be located in one of two places: | ||
| 30 | "NVRAM/sr/default/SrConfig.json" for ShowRunner versions 3.011 and newer | ||
| 31 | "NVRAM/CiLightingConfig.json" for ShowRunner versions 3.010 and older | ||
| 32 | * Open the configuration file in a text editor and the locate the "CustomLogoFile" line towards the bottom of the config: | ||
| 33 | [[image:1591724611629-257.png]] | ||
| 34 | * Change the value ##null ##to the name of your custom logo file: | ||
| 35 | [[image:1591724595422-172.png]] | ||
| 36 | * Save the updated configuration file | ||
| 37 | * Load the updated configuration file to your processor using either ShowRunner's File Management page or using Toolbox | ||
| 38 | ** If using Toolbox, navigate to either: | ||
| 39 | "NVRAM/sr/default" for ShowRunner versions 3.011 and newer | ||
| 40 | "NVRAM" for ShowRunner versions 3.010 and older | ||
| 41 | ** Open Text Console and connect to the processor and type the## progreset## command and then press enter to restart the processor and finish loading the config | ||
| 42 | |||
| 43 | === Custom Logos on Processors with Authentication Enabled === | ||
| 44 | |||
| 45 | If your project is running on a 3-series with authentication enabled or a 4-series with user page authentication, you will need to follow [[these additional steps>>doc:SHOWRUNNER™ User Guide & Wiki.SHOWRUNNER™ Appendix.Resolving Custom Logo Not Loading on Touchscreens with Authentication on processor Enabled.WebHome]]. |