Skip to Content

Changes for page Custom Logo

Last modified by Alexander Mott on 2025/03/18 19:40
From version 9.1
edited by Alexander Mott
on 2021/12/21 23:00
Change comment: There is no comment for this version
To version 14.3
edited by Alexander Mott
on 2022/06/09 17:03
Change comment: Renamed from xwiki:SHOWRUNNER™ Setup Guide.SHOWRUNNER™ Installation Guide.Custom Logo.WebHome

Summary

Details

Page properties
Parent
... ... @@ -1,1 +1,1 @@
1 -SHOWRUNNER™ User Guide & Wiki.SHOWRUNNER™ Installation Guide.WebHome
1 +SHOWRUNNER™ Setup Guide.SHOWRUNNER™ Installation Guide.WebHome
Hidden
... ... @@ -1,1 +1,1 @@
1 -true
1 +false
Content
... ... @@ -8,7 +8,7 @@
8 8  * TSW-1070 screens have an aspect ratio of 16:10 and a native resolution 1920x1080.
9 9  * TSW-760 screens have an aspect ratio of 17:10 and a native resolution of 1024x600.
10 10  
11 -=== Loading Custom Logo to the Processor ===
11 +=== Loading a Custom Logo to the Processor ===
12 12  
13 13  Once a custom logo has been created, it must be loaded to the processor (not to the touchscreen itself).
14 14  
... ... @@ -16,7 +16,7 @@
16 16  * Connect to the lighting control processor that the TSW touch screen is pointed at
17 17  * Select "Internal Flash" from the list on the left
18 18  * Select "HTML" from the list on the left
19 -* Right-click in an empty area on the and select "Copy File(s) From..."
19 +* Right-click in an empty area on the right and select "Copy File(s) From..."
20 20  * Select your custom logo .png file and load it to the processor
21 21  
22 22  [[image:1591724546339-953.png]]
... ... @@ -38,4 +38,8 @@
38 38  ** If using Toolbox, navigate to either:
39 39  "NVRAM/sr/default" for ShowRunner versions 3.011 and newer
40 40  "NVRAM" for ShowRunner versions 3.010 and older
41 -** Open Text Console and connect to the processor and type the## progreset## command and then press enter to restart the processor and finish loading the config
41 +** Open Text Console and connect to the processor and type the## progreset## command and then press enter to restart the processor and finish loading the config
42 +
43 +=== Custom Logos on Processors with Authentication Enabled ===
44 +
45 +If your project is running on a 3-series with authentication enabled or a 4-series with user page authentication enabled, you will need to follow [[these additional steps>>doc:SHOWRUNNER™ User Guide & Wiki.SHOWRUNNER™ Appendix.Resolving Custom Logo Not Loading on Touchscreens with Authentication on processor Enabled.WebHome]].