Skip to Content

Changes for page Custom Logo

Last modified by Alexander Mott on 2025/03/18 19:40
From version 18.1
edited by Alexander Mott
on 2025/03/18 19:40
Change comment: There is no comment for this version
To version 15.1
edited by Alexander Mott
on 2022/09/17 00:29
Change comment: There is no comment for this version

Summary

Details

Page properties
Content
... ... @@ -6,12 +6,12 @@
6 6  (((
7 7  = Custom Logo Guidelines =
8 8  
9 -To use a custom logo in your ShowRunnerCLC™ project, you should first create a custom logo per the following guidelines.Note that custom logos are not supported for processors with a Control Subnet if the TSW are connected via the Control Subnet (custom logos for TSW connected via the LAN port are supported).
9 +To use a custom logo in your ShowRunner project, you should first create a custom logo per the following guidelines.
10 10  
11 11  Custom logos should have a white background and be in .png format with a resolution of 1280x800 for compatibility with the widest range of of touch screens.
12 12  
13 13  * TSW-770 and TSW-1060 screens have an aspect ratio of 16:10 and a native resolution of 1280x800.
14 -* TSW-1070 screens have an aspect ratio of 16:10 and a native resolution 1920x1200.
14 +* TSW-1070 screens have an aspect ratio of 16:10 and a native resolution 1920x1080.
15 15  * TSW-760 screens have an aspect ratio of 17:10 and a native resolution of 1024x600.
16 16  
17 17  = Loading a Custom Logo to the Processor =
... ... @@ -40,9 +40,9 @@
40 40  * Change the value ##null ##to the name of your custom logo file:
41 41  [[image:1591724595422-172.png]]
42 42  * Save the updated configuration file
43 -* Load the updated configuration file to your processor using either ShowRunnerCLC's™ File Management page or using Toolbox
43 +* Load the updated configuration file to your processor using either ShowRunner's File Management page or using Toolbox
44 44  ** If using Toolbox, navigate to either:
45 -"NVRAM/sr/default" for ShowRunnerCLC™ versions 3.011 and newer
45 +"NVRAM/sr/default" for ShowRunner versions 3.011 and newer
46 46  "NVRAM" for ShowRunner versions 3.010 and older
47 47  ** Open Text Console and connect to the processor and type the## progreset## command and then press enter to restart the processor and finish loading the config
48 48