Skip to Content

Changes for page Custom Logo

Last modified by Alexander Mott on 2025/03/18 19:40
From version 14.2
edited by Alexander Mott
on 2022/06/09 17:02
Change comment: Update document after refactoring.
To version 8.3
edited by Alexander Mott
on 2021/12/21 22:43
Change comment: There is no comment for this version

Summary

Details

Page properties
Parent
... ... @@ -1,1 +1,1 @@
1 -SHOWRUNNER™ Setup Guide.SHOWRUNNER™ Installation Guide.WebHome
1 +SHOWRUNNER™ User Guide & Wiki.SHOWRUNNER™ Installation Guide.WebHome
Hidden
... ... @@ -1,1 +1,1 @@
1 -false
1 +true
Content
... ... @@ -1,5 +3,3 @@
1 -=== Custom Logo Guidelines ===
2 -
3 3  To use a custom logo in your ShowRunner project, you should first create a custom logo per the following guidelines.
4 4  
5 5  Custom logos should have a white background and be in .png format with a resolution of 1280x800 for compatibility with the widest range of of touch screens.
... ... @@ -8,7 +8,6 @@
8 8  * TSW-1070 screens have an aspect ratio of 16:10 and a native resolution 1920x1080.
9 9  * TSW-760 screens have an aspect ratio of 17:10 and a native resolution of 1024x600.
10 10  
11 -=== Loading a Custom Logo to the Processor ===
12 12  
13 13  Once a custom logo has been created, it must be loaded to the processor (not to the touchscreen itself).
14 14  
... ... @@ -16,30 +16,26 @@
16 16  * Connect to the lighting control processor that the TSW touch screen is pointed at
17 17  * Select "Internal Flash" from the list on the left
18 18  * Select "HTML" from the list on the left
19 -* Right-click in an empty area on the right and select "Copy File(s) From..."
16 +* Right-click in an empty area on the and select "Copy File(s) From..."
20 20  * Select your custom logo .png file and load it to the processor
21 21  
22 22  [[image:1591724546339-953.png]]
23 23  
24 -=== Updating the Lighting Configuration File ===
25 25  
26 26  Once the logo has been loaded to the processor, it is necessary to update the lighting configuration file.
27 27  
28 -* First, pull the configuration file using either ShowRunner's File Management page (recommended), or pull it directly from the processor using Toolbox's File Manager tool. 
29 -** If using Toolbox's File Manager tool, the config will be located in one of two places:
30 -"NVRAM/sr/default/SrConfig.json" for ShowRunner versions 3.011 and newer
31 -"NVRAM/CiLightingConfig.json" for ShowRunner versions 3.010 and older
32 -* Open the configuration file in a text editor and the locate the "CustomLogoFile" line towards the bottom of the config:
24 +Change the "CustomLogoFile" in "CiLightingConfig.json" file provided by Chief Integrations.
25 +
26 +* "null" will be changed to the file name .png
27 +
33 33  [[image:1591724611629-257.png]]
34 -* Change the value ##null ##to the name of your custom logo file:
29 +
35 35  [[image:1591724595422-172.png]]
36 -* Save the updated configuration file
37 -* Load the updated configuration file to your processor using either ShowRunner's File Management page or using Toolbox
38 -** If using Toolbox, navigate to either:
39 -"NVRAM/sr/default" for ShowRunner versions 3.011 and newer
40 -"NVRAM" for ShowRunner versions 3.010 and older
41 -** Open Text Console and connect to the processor and type the## progreset## command and then press enter to restart the processor and finish loading the config
42 42  
43 -=== Custom Logos on Processors with Authentication Enabled ===
32 +* Save updated config file
33 +* Open File Manager app in Toolbox
34 +* Select NVRAM folder
35 +* Right-click and Copy File(s) From...
36 +* Select "CiLightingConfig.json"
44 44  
45 -If your project is running on a 3-series with authentication enabled or a 4-series with user page authentication enabled, you will need to follow [[these additional steps>>doc:SHOWRUNNER™ User Guide & Wiki.SHOWRUNNER™ Appendix.Resolving Custom Logo Not Loading on Touchscreens with Authentication on processor Enabled.WebHome]].
38 +