Changes for page Zūm Net Device Setup

Last modified by Alexander Mott on 2024/10/22 19:55
From version 10.8
edited by Alexander Mott
on 2022/06/17 17:13
Change comment: There is no comment for this version
To version 10.7
edited by Alexander Mott
on 2022/06/17 16:56
Change comment: There is no comment for this version

Summary

Details

Page properties
Content
... ... @@ -51,24 +51,8 @@
51 51  
52 52  ===== Identifying by Hostname =====
53 53  
54 -The Crestron Zūm App is used to configure the internal logic of Zūm Wired rooms. This internal logic determines the room behavior when ZUMNET-JBOXs are used in standalone applications or if communication to the processor is lost. Even on SHOWRUNNER™ jobs with a central program running the lighting controls, it is best practice to configure the internal logic to match as closely as possible the SHOWRUNNER™ logic in order to minimize disruption to end-users in the event of a processor or network failure.
54 +Oftentimes,
55 55  
56 -In addition to configuring default room logic, the Crestron Zūm App can be used to change the hostname of the ZUMNET-JBOX for each room. By default, the hostname for a ZUMNET-JBOX is the model followed by the last six digits of the MAC address, e.g. "ZUMNET-JBOX-16A-LV-F2DA94". If you or the electrical contractor already intend to configure the internal logic each ZUMNET-JBOX, it would be a good idea to also change the hostname to something more identifiable.
57 -
58 -To change the hostname using the Crestron Zūm App:
59 -
60 -* Connect to the ZUMNET-JBOX in the App
61 -* Tap "Room Settings"
62 -* Tap "Network"
63 -* Tap the Hostname field and edit the Hostname
64 -* Scroll to the bottom of the page and tap "Save settings"
65 -* Tap "OK" to apply the changes and reboot the ZUMNET-JBOX
66 -** Note that rebooting the JBOX will cause the lights to briefly cut out
67 -
68 -If all hostnames have been set, then it becomes very easy to know which DHCP assigned IP address is associated with each room using the Device Summary. Generate a Device Summary with the new hostnames and proceed to IP configuration.
69 -
70 -
71 -
72 72  If the electrical contractor has provided a list of which serial numbers/MAC addresses belong to each installed ZUMNET-JBOX, then it is relatively easy to identify which ZUMNET-JBOX should get which IP-ID:
73 73  
74 74  * Connect to the lighting network and open Device Discovery Tool in Toolbox