Changes for page Zūm Net Device Setup
Last modified by Alexander Mott on 2024/10/22 19:55
From version 10.7
edited by Alexander Mott
on 2022/06/17 16:56
on 2022/06/17 16:56
Change comment:
There is no comment for this version
To version 10.8
edited by Alexander Mott
on 2022/06/17 17:13
on 2022/06/17 17:13
Change comment:
There is no comment for this version
Summary
-
Page properties (1 modified, 0 added, 0 removed)
Details
- Page properties
-
- Content
-
... ... @@ -51,8 +51,24 @@ 51 51 52 52 ===== Identifying by Hostname ===== 53 53 54 - Oftentimes,54 +The Crestron Zūm App is used to configure the internal logic of Zūm Wired rooms. This internal logic determines the room behavior when ZUMNET-JBOXs are used in standalone applications or if communication to the processor is lost. Even on SHOWRUNNER™ jobs with a central program running the lighting controls, it is best practice to configure the internal logic to match as closely as possible the SHOWRUNNER™ logic in order to minimize disruption to end-users in the event of a processor or network failure. 55 55 56 +In addition to configuring default room logic, the Crestron Zūm App can be used to change the hostname of the ZUMNET-JBOX for each room. By default, the hostname for a ZUMNET-JBOX is the model followed by the last six digits of the MAC address, e.g. "ZUMNET-JBOX-16A-LV-F2DA94". If you or the electrical contractor already intend to configure the internal logic each ZUMNET-JBOX, it would be a good idea to also change the hostname to something more identifiable. 57 + 58 +To change the hostname using the Crestron Zūm App: 59 + 60 +* Connect to the ZUMNET-JBOX in the App 61 +* Tap "Room Settings" 62 +* Tap "Network" 63 +* Tap the Hostname field and edit the Hostname 64 +* Scroll to the bottom of the page and tap "Save settings" 65 +* Tap "OK" to apply the changes and reboot the ZUMNET-JBOX 66 +** Note that rebooting the JBOX will cause the lights to briefly cut out 67 + 68 +If all hostnames have been set, then it becomes very easy to know which DHCP assigned IP address is associated with each room using the Device Summary. Generate a Device Summary with the new hostnames and proceed to IP configuration. 69 + 70 + 71 + 56 56 If the electrical contractor has provided a list of which serial numbers/MAC addresses belong to each installed ZUMNET-JBOX, then it is relatively easy to identify which ZUMNET-JBOX should get which IP-ID: 57 57 58 58 * Connect to the lighting network and open Device Discovery Tool in Toolbox