Changes for page Zūm Net Device Setup

Last modified by Alexander Mott on 2024/10/22 19:55
From version 10.7
edited by Alexander Mott
on 2022/06/17 16:56
Change comment: There is no comment for this version
To version 10.2
edited by Alexander Mott
on 2022/06/17 15:03
Change comment: There is no comment for this version

Summary

Details

Page properties
Content
... ... @@ -29,26 +29,8 @@
29 29  
30 30  1. Identifying by hostname
31 31  1. Identifying by serial number or MAC address
32 -1. Identifying through Device Tree View
32 +1. Identifying through Toolbox
33 33  
34 -Each of these methods involves generating a Device Summary using the Device Discovery Tool in Toolbox. The Device Summary is a file which lists all devices that are discoverable on the network along with useful information such as their hostname, IP address, and MAC address.
35 -
36 -To generate a Device Summary in Toolbox:
37 -
38 -* Connect to the lighting network and open Device Discovery Tool in Toolbox
39 -* The Device Discovery tool will automatically report how many Ethernet devices have been discovered
40 -* Verify that the expected number of Ethernet devices have been discovered, including any TSWs, GLPACs, DIN-CENCN-2s, etc.
41 -** Note that only Crestron devices will appear in Device Discovery; non-Crestron devices (such as Pharos or Enttec DMX controllers) will not appear in Device Discovery Tool
42 -** If no devices are discovered, verify that your computer is connected to the network and your IP address is compatible with the network
43 -** If some devices are missing, there may be an issue with your DHCP server settings or the network wiring
44 -* Click the "Export..." button below the list of discovered devices
45 -** If this button says "Address Book", then Toolbox needs to be updated
46 -* Click the Write Device Summary button and save the Device Summary to your computer
47 -** Though saved as a text file, the Device Summary is actually a table of comma separated values
48 -** Renaming DeviceSummary.txt to DeviceSummary.csv will allow it to be opened and manipulated in common spreadsheet software such as Microsoft Excel or LibreOffice Calc
49 -
50 -Once the Device Summary has been generated, proceed to identifying each ZUMNET-JBOX using the hostname, SN/MAC, or Device Tree View methods described below.
51 -
52 52  ===== Identifying by Hostname =====
53 53  
54 54  Oftentimes,
... ... @@ -85,9 +85,9 @@
85 85  Once you have identified which IP address has been assigned to each ZUMNET-JBOX, you can begin configuring them with permanent static IP addresses and the correct IP-ID:
86 86  
87 87  * Open Text Console in Toolbox and connect to the first ZUMNET-JBOX
88 -* Run the following commands to configure the ZUMNET-JBOXs IP settings (example is for a **10.0.0.0(% style="color:darkgoldenrod" %)/24(%%)** subnet, with a permanent IP address of (% style="color:blue" %)**10.0.0.80**(%%), an IP-ID of (% style="color:olive" %)**30**(%%), a processor IP address of (% style="color:orange" %)**10.0.0.10**(%%), and a hostname of (% style="color:#800080" %)**ZNET-JBOX-RM-201**(%%))
70 +* Run the following commands to configure the ZUMNET-JBOXs IP settings (example is for a **10.0.0.0(% style="color:darkgoldenrod" %)/24(%%)** subnet, with a permanent IP address of (% style="color:blue" %)**10.0.0.20**(%%), an IP-ID of (% style="color:olive" %)**30**(%%), a processor IP address of (% style="color:orange" %)**10.0.0.10**(%%), and a hostname of (% style="color:#800080" %)**ZNET-JBOX-RM-201**(%%))
89 89  ** Disable DHCP: ##dhcp off##
90 -** Set IP address: ##ipa 0 (% style="color:blue" %)**10.0.0.80**(%%)##
72 +** Set IP address: ##ipa 0 (% style="color:blue" %)**10.0.0.20**(%%)##
91 91  ** Set IP subnet mask: ##ipm 0 (% style="color:darkgoldenrod" %)**255.255.255.0**(%%)##
92 92  ** Set default gateway: ##defr 0 **10.0.0.1**##
93 93  ** Update IP table: ##addm (% style="color:olive" %)**30**(%%) (% style="color:orange" %)**10.0.0.10**(%%)##
... ... @@ -97,12 +97,14 @@
97 97  
98 98  === Zūm Net Specific Configuration ===
99 99  
100 -Zūm Net devices have a two additional settings not present for other devices: Zūm/Cresnet mode and Master/Slave mode. ZUMNET-JBOXs should ship as Master devices in Zūm Mode from the factory, and this is typically the desired setting.
82 +Zūm Net devices have a two additional settings not present for other devices: Zūm/Cresnet mode and Master/Slave mode.
101 101  
102 102  ==== Zūm/Cresnet Mode ====
103 103  
104 -Zūm Mode (also known as App Mode) is the default setting for new ZUMNET-JBOXs, and allows them to be configured from the Crestron Zūm App. If a ZUMNET-JBOX is put into Cresnet mode, it will no longer be able to be configured using the Crestron Zūm App and all internal logic will be disabled. Generally, Cresnet mode is only required if non-Zūm Link devices are connected to the ZUMNET-JBOX (e.g. a GL-EXP-DIMU-CN phase dimmer or C2N-CBD-P Cameo keypads) or if certain SHOWRUNNER™ features are required (such as changing the dimming response curve).
86 +ZUMNET-JBOXs should ship in "Zūm Mode" by default, also known as "App Mode" because this is the setting required to be able to configure Zūm Wired rooms using the Crestron Zūm Mobile App.
105 105  
88 +If a ZUMNET-JBOX is put into Cresnet mode, it will no longer be able to be configured using the App and all internal logic will be disabled. Generally, Cresnet mode is only required if non Zūm Link devices are connected to the ZUMNET-JBOX (e.g. a GL-EXP-DIMU-CN phase dimmer or C2N-CBD-P Cameo keypads).
89 +
106 106  The commands to view or change the Zūm/Cresnet mode are:
107 107  
108 108  * View current mode: ##zwmode##
... ... @@ -113,8 +113,10 @@
113 113  
114 114  ==== Master/Slave Mode ====
115 115  
116 -ZUMNET-JBOXs ship in "Master" mode by default, and generally this is how they should be configured. "Slave" mode effectively turns a ZUMNET-JBOX into a ZUMLINK-JBOX. There are two scenarios in which a ZUMNET-JBOX will need to be configured in "Slave" mode:
100 +ZUMNET-JBOXs should ship in "Master" mode by default, and generally this is how they should be configured.
117 117  
102 +"Slave" mode effectively turns a ZUMNET-JBOX into a ZUMLINK-JBOX. There are two scenarios in which a ZUMNET-JBOX will need to be configured in "Slave" mode:
103 +
118 118  1. It is connected to another ZUMNET-JBOX via the Zūm Link bus
119 119  1. It is being used as a Cresnet device, connected to a processor or DIN-CENCN-2 using a Cresnet/Zūm Link adapter
120 120