Changes for page Zūm Net Device Setup

Summary

• Page properties (1 modified, 0 added, 0 removed)

Details

Page properties

Content

...	...	@@ -43,9 +43,10 @@
43	43	** If some devices are missing, there may be an issue with your DHCP server settings or the network wiring
44	44	* Click the "Export..." button below the list of discovered devices
45	45	** If this button says "Address Book", then Toolbox needs to be updated
46		-* Click the Write Device Summary button and save the Device Summary to your computer
47		-** Though saved as a text file, the Device Summary is actually a table of comma separated values
48		-** Renaming DeviceSummary.txt to DeviceSummary.csv will allow it to be opened and manipulated in common spreadsheet software such as Microsoft Excel or LibreOffice Calc
	46	+* Click the Write Device Summary button and save the DeviceSummary.txt to your computer
	47	+* The DeviceSummary.txt provides the IP address, MAC address, and serial number for each device on the network
	48	+* Cross reference the DeviceSummary.txt with the serial numbers/MAC addresses provided by the installer in order to determine which ZUMNET-JBOX has been assigned each IP address
	49	+* Update the SRTakeoff.xlsx with the device serial number, MAC address, and automatically assigned IP address for all ZUMNET-JBOXs
49	49
50	50	===== Identifying by Hostname =====
51	51
...	...	@@ -95,12 +95,14 @@
95	95
96	96	=== Zūm Net Specific Configuration ===
97	97
98		-Zūm Net devices have a two additional settings not present for other devices: Zūm/Cresnet mode and Master/Slave mode. ZUMNET-JBOXs should ship as Master devices in Zūm Mode from the factory, and this is typically the desired setting.
	99	+Zūm Net devices have a two additional settings not present for other devices: Zūm/Cresnet mode and Master/Slave mode.
99	99
100	100	==== Zūm/Cresnet Mode ====
101	101
102		-Zūm Mode (also known as App Mode) is the default setting for new ZUMNET-JBOXs, and allows them to be configured from the Crestron Zūm App. If a ZUMNET-JBOX is put into Cresnet mode, it will no longer be able to be configured using the Crestron Zūm App and all internal logic will be disabled. Generally, Cresnet mode is only required if non-Zūm Link devices are connected to the ZUMNET-JBOX (e.g. a GL-EXP-DIMU-CN phase dimmer or C2N-CBD-P Cameo keypads) or if certain SHOWRUNNER™ features are required (such as changing the dimming response curve).
	103	+ZUMNET-JBOXs should ship in "Zūm Mode" by default, also known as "App Mode" because this is the setting required to be able to configure Zūm Wired rooms using the Crestron Zūm Mobile App.
103	103
	105	+If a ZUMNET-JBOX is put into Cresnet mode, it will no longer be able to be configured using the App and all internal logic will be disabled. Generally, Cresnet mode is only required if non Zūm Link devices are connected to the ZUMNET-JBOX (e.g. a GL-EXP-DIMU-CN phase dimmer or C2N-CBD-P Cameo keypads).
	106	+
104	104	The commands to view or change the Zūm/Cresnet mode are:
105	105
106	106	* View current mode: ##zwmode##
...	...	@@ -111,8 +111,10 @@
111	111
112	112	==== Master/Slave Mode ====
113	113
114		-ZUMNET-JBOXs ship in "Master" mode by default, and generally this is how they should be configured. "Slave" mode effectively turns a ZUMNET-JBOX into a ZUMLINK-JBOX. There are two scenarios in which a ZUMNET-JBOX will need to be configured in "Slave" mode:
	117	+ZUMNET-JBOXs should ship in "Master" mode by default, and generally this is how they should be configured.
115	115
	119	+"Slave" mode effectively turns a ZUMNET-JBOX into a ZUMLINK-JBOX. There are two scenarios in which a ZUMNET-JBOX will need to be configured in "Slave" mode:
	120	+
116	116	1. It is connected to another ZUMNET-JBOX via the Zūm Link bus
117	117	1. It is being used as a Cresnet device, connected to a processor or DIN-CENCN-2 using a Cresnet/Zūm Link adapter
118	118