Changes for page Zūm Net Device Setup

Summary

• Page properties (1 modified, 0 added, 0 removed)

Details

Page properties

Content

...	...	@@ -31,22 +31,6 @@
31	31	1. Identifying by serial number or MAC address
32	32	1. Identifying through Toolbox
33	33
34		-Each of these methods involves generating a Device Summary using the Device Discovery Tool in Toolbox. The Device Summary is a file which lists all devices that are discoverable on the network along with useful information such as their hostname, IP address, and MAC address.
35		-
36		-To generate a Device Summary in Toolbox:
37		-
38		-* Connect to the lighting network and open Device Discovery Tool in Toolbox
39		-* The Device Discovery tool will automatically report how many Ethernet devices have been discovered
40		-* Verify that the expected number of Ethernet devices have been discovered, including any TSWs, GLPACs, DIN-CENCN-2s, etc.
41		-** Note that only Crestron devices will appear in Device Discovery; non-Crestron devices (such as Pharos or Enttec DMX controllers) will not appear in Device Discovery Tool
42		-** If no devices are discovered, verify that your computer is connected to the network and your IP address is compatible with the network
43		-** If some devices are missing, there may be an issue with your DHCP server settings or the network wiring
44		-* Click the "Export..." button below the list of discovered devices
45		-** If this button says "Address Book", then Toolbox needs to be updated
46		-* Click the Write Device Summary button and save the Device Summary to your computer
47		-** Though saved as a text file, the Device Summary is actually a table of comma separated values
48		-** Renaming DeviceSummary.txt to DeviceSummary.csv will allow it to be opened and manipulated in common spreadsheet software such as Microsoft Excel or LibreOffice Calc
49		-
50	50	===== Identifying by Hostname =====
51	51
52	52	Oftentimes,
...	...	@@ -83,9 +83,9 @@
83	83	Once you have identified which IP address has been assigned to each ZUMNET-JBOX, you can begin configuring them with permanent static IP addresses and the correct IP-ID:
84	84
85	85	* Open Text Console in Toolbox and connect to the first ZUMNET-JBOX
86		-* Run the following commands to configure the ZUMNET-JBOXs IP settings (example is for a **10.0.0.0(% style="color:darkgoldenrod" %)/24(%%)** subnet, with a permanent IP address of (% style="color:blue" %)**10.0.0.80**(%%), an IP-ID of (% style="color:olive" %)**30**(%%), a processor IP address of (% style="color:orange" %)**10.0.0.10**(%%), and a hostname of (% style="color:#800080" %)**ZNET-JBOX-RM-201**(%%))
	70	+* Run the following commands to configure the ZUMNET-JBOXs IP settings (example is for a **10.0.0.0(% style="color:darkgoldenrod" %)/24(%%)** subnet, with a permanent IP address of (% style="color:blue" %)**10.0.0.20**(%%), an IP-ID of (% style="color:olive" %)**30**(%%), a processor IP address of (% style="color:orange" %)**10.0.0.10**(%%), and a hostname of (% style="color:#800080" %)**ZNET-JBOX-RM-201**(%%))
87	87	** Disable DHCP: ##dhcp off##
88		-** Set IP address: ##ipa 0 (% style="color:blue" %)**10.0.0.80**(%%)##
	72	+** Set IP address: ##ipa 0 (% style="color:blue" %)**10.0.0.20**(%%)##
89	89	** Set IP subnet mask: ##ipm 0 (% style="color:darkgoldenrod" %)**255.255.255.0**(%%)##
90	90	** Set default gateway: ##defr 0 **10.0.0.1**##
91	91	** Update IP table: ##addm (% style="color:olive" %)**30**(%%) (% style="color:orange" %)**10.0.0.10**(%%)##
...	...	@@ -95,7 +95,7 @@
95	95
96	96	=== Zūm Net Specific Configuration ===
97	97
98		-Zūm Net devices have a two additional settings not present for other devices: Zūm/Cresnet mode and Master/Slave mode. ZUMNET-JBOXs should ship as Master devices in App mode from the factory, and this is typically the desired setting.
	82	+Zūm Net devices have a two additional settings not present for other devices: Zūm/Cresnet mode and Master/Slave mode.
99	99
100	100	==== Zūm/Cresnet Mode ====
101	101