Changes for page Zūm Net Device Setup

Last modified by Alexander Mott on 2024/10/22 19:55
From version 10.3
edited by Alexander Mott
on 2022/06/17 16:47
Change comment: There is no comment for this version
To version 10.1
edited by Alexander Mott
on 2022/06/16 20:41
Change comment: There is no comment for this version

Summary

Details

Page properties
Content
... ... @@ -21,37 +21,10 @@
21 21  1. Identifying which DHCP assigned IP address corresponds to each ZUMNET-JBOX
22 22  1. Connecting to each ZUMNET-JBOX and assigning a permanent static IP address and IP-ID
23 23  
24 -==== Identifying ZUMNET-JBOXs ====
24 +==== Identifying Zūm Net Devices ====
25 25  
26 26  Once all ZUMNET-JBOXs have been assigned temporary IP addresses from the DHCP server, they must each be identified so that the correct IP-ID can be assigned. The goal is to associate each assigned IP address with the room that each ZUMNET-JBOX is meant to control. Then we can connect to each ZUMNET-JBOX and set static IP addresses and update the IP table with the correct IP-ID.
27 27  
28 -There are three primary ways of identifying ZUMNET-JBOXs:
29 -
30 -1. Identifying by hostname
31 -1. Identifying by serial number or MAC address
32 -1. Identifying through Toolbox
33 -
34 -Each of these methods involves generating a Device Summary using the Device Discovery Tool in Toolbox. The Device Summary is a file which lists all devices that are discoverable on the network along with useful information such as their hostname, IP address, and MAC address.
35 -
36 -To generate a Device Summary in Toolbox:
37 -
38 -* Connect to the lighting network and open Device Discovery Tool in Toolbox
39 -* The Device Discovery tool will automatically report how many Ethernet devices have been discovered
40 -* Verify that the expected number of Ethernet devices have been discovered, including any TSWs, GLPACs, DIN-CENCN-2s, etc.
41 -** Note that only Crestron devices will appear in Device Discovery; non-Crestron devices (such as Pharos or Enttec DMX controllers) will not appear in Device Discovery Tool
42 -** If no devices are discovered, verify that your computer is connected to the network and your IP address is compatible with the network
43 -** If some devices are missing, there may be an issue with your DHCP server settings or the network wiring
44 -* Click the "Export..." button below the list of discovered devices
45 -** If this button says "Address Book", then Toolbox needs to be updated
46 -* Click the Write Device Summary button and save the DeviceSummary.txt to your computer
47 -* The DeviceSummary.txt provides the IP address, MAC address, and serial number for each device on the network
48 -* Cross reference the DeviceSummary.txt with the serial numbers/MAC addresses provided by the installer in order to determine which ZUMNET-JBOX has been assigned each IP address
49 -* Update the SRTakeoff.xlsx with the device serial number, MAC address, and automatically assigned IP address for all ZUMNET-JBOXs
50 -
51 -===== Identifying by Hostname =====
52 -
53 -Oftentimes,
54 -
55 55  If the electrical contractor has provided a list of which serial numbers/MAC addresses belong to each installed ZUMNET-JBOX, then it is relatively easy to identify which ZUMNET-JBOX should get which IP-ID:
56 56  
57 57  * Connect to the lighting network and open Device Discovery Tool in Toolbox
... ... @@ -84,9 +84,9 @@
84 84  Once you have identified which IP address has been assigned to each ZUMNET-JBOX, you can begin configuring them with permanent static IP addresses and the correct IP-ID:
85 85  
86 86  * Open Text Console in Toolbox and connect to the first ZUMNET-JBOX
87 -* Run the following commands to configure the ZUMNET-JBOXs IP settings (example is for a **10.0.0.0(% style="color:darkgoldenrod" %)/24(%%)** subnet, with a permanent IP address of (% style="color:blue" %)**10.0.0.80**(%%), an IP-ID of (% style="color:olive" %)**30**(%%), a processor IP address of (% style="color:orange" %)**10.0.0.10**(%%), and a hostname of (% style="color:#800080" %)**ZNET-JBOX-RM-201**(%%))
60 +* Run the following commands to configure the ZUMNET-JBOXs IP settings (example is for a **10.0.0.0(% style="color:darkgoldenrod" %)/24(%%)** subnet, with a permanent IP address of (% style="color:blue" %)**10.0.0.20**(%%), an IP-ID of (% style="color:olive" %)**30**(%%), a processor IP address of (% style="color:orange" %)**10.0.0.10**(%%), and a hostname of (% style="color:#800080" %)**ZNET-JBOX-RM-201**(%%))
88 88  ** Disable DHCP: ##dhcp off##
89 -** Set IP address: ##ipa 0 (% style="color:blue" %)**10.0.0.80**(%%)##
62 +** Set IP address: ##ipa 0 (% style="color:blue" %)**10.0.0.20**(%%)##
90 90  ** Set IP subnet mask: ##ipm 0 (% style="color:darkgoldenrod" %)**255.255.255.0**(%%)##
91 91  ** Set default gateway: ##defr 0 **10.0.0.1**##
92 92  ** Update IP table: ##addm (% style="color:olive" %)**30**(%%) (% style="color:orange" %)**10.0.0.10**(%%)##