Changes for page Zūm Net Device Setup

Last modified by Alexander Mott on 2024/10/22 19:55
From version 10.2
edited by Alexander Mott
on 2022/06/17 15:03
Change comment: There is no comment for this version
To version 10.1
edited by Alexander Mott
on 2022/06/16 20:41
Change comment: There is no comment for this version

Summary

Details

Page properties
Content
... ... @@ -21,20 +21,10 @@
21 21  1. Identifying which DHCP assigned IP address corresponds to each ZUMNET-JBOX
22 22  1. Connecting to each ZUMNET-JBOX and assigning a permanent static IP address and IP-ID
23 23  
24 -==== Identifying ZUMNET-JBOXs ====
24 +==== Identifying Zūm Net Devices ====
25 25  
26 26  Once all ZUMNET-JBOXs have been assigned temporary IP addresses from the DHCP server, they must each be identified so that the correct IP-ID can be assigned. The goal is to associate each assigned IP address with the room that each ZUMNET-JBOX is meant to control. Then we can connect to each ZUMNET-JBOX and set static IP addresses and update the IP table with the correct IP-ID.
27 27  
28 -There are three primary ways of identifying ZUMNET-JBOXs:
29 -
30 -1. Identifying by hostname
31 -1. Identifying by serial number or MAC address
32 -1. Identifying through Toolbox
33 -
34 -===== Identifying by Hostname =====
35 -
36 -Oftentimes,
37 -
38 38  If the electrical contractor has provided a list of which serial numbers/MAC addresses belong to each installed ZUMNET-JBOX, then it is relatively easy to identify which ZUMNET-JBOX should get which IP-ID:
39 39  
40 40  * Connect to the lighting network and open Device Discovery Tool in Toolbox