Changes for page Zūm Net Device Setup

Last modified by Alexander Mott on 2024/10/22 19:55
From version 1.1
edited by Alexander Mott
on 2022/06/13 21:56
Change comment: There is no comment for this version
To version 2.1
edited by Alexander Mott
on 2022/06/14 22:49
Change comment: Uploaded new attachment "1655246948921-246.png", version {1}

Summary

Details

Page properties
Content
... ... @@ -1,6 +1,6 @@
1 1  === ZUMNET-JBOXs in SHOWRUNNER™ ===
2 2  
3 -ZUMNET-JBOXs are part of Crestron's latest Zūm Wired system, acting as an Ethernet-to-Zūm Link bridge to convert between Ethernet and Zūm Link data traffic. This helps avoid issues with bandwidth over the Cresnet bus for jobs which have a large number of Cresnet devices, as well as allowing for additional power supplies to provide power Cresnet devices.
3 +ZUMNET-JBOXs are part of Crestron's latest Zūm Wired system, acting as an Ethernet-to-Zūm Link bridge to convert between Ethernet and Zūm Link data traffic.
4 4  
5 5  For SHOWRUNNER™ installations, the IP address of the DIN-CENCN-2 does not matter as long as it is in the same range as the processor and does not conflict with any other devices on the network. Instead, DIN-CENCN-2s are identified to the processor via their IP-ID. Note that which Cresnet devices are landed at each Net of each DIN-CENCN-2 matters, and if devices are moved between Nets or between DIN-CENCN-2s then the configuration will need to be updated (see below). Chief Integrations typically provides an SRTakeoff.xlsx spreadsheet with an IP Table tab that lists all the DIN-CENCN-2 IP-IDs in the program. If no takeoff is provided, then the processor's IP table can be checked by running the ##ipt -t ##command from the processor after the configuration is loaded. DIN-CENCN-2's will typically have IP-IDs in the "##Dx##" range.
6 6  
1655246948921-246.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.alexander\.mott@chiefintegrations\.com
Size
... ... @@ -1,0 +1,1 @@
1 +10.6 KB
Content