Updating Firmware
Version 2.26 by Alexander Mott on 2023/12/11 20:33
ShowRunnerCLC™ is tested against the latest Crestron firmware releases, and as such it is recommended to update all device firmware whenever starting up a job. While firmware updates can be performed at any time, it is typically recommended to update network devices after their network settings have been configured (to take advantage of increased file transfer speed over Ethernet compared to USB), but before loading the ShowRunnerCLC™ program and starting up the job (to avoid any potential bugs that may result from using outdated firmware).
Network Devices
Networked devices (i.e. devices connected to the LAN or Control Subnet)
Sub 1
Lorem
Sub 2
Lorem
Sub 2
Lorem
Controlled Hardware
Lorem
Sub 1
Lorem
Sub 2
Lorem
Sub 2
Lorem