Skip to Content

TSW Touchpanel Setup

Version 1.1 by Alexander Mott on 2022/06/09 17:24

TSW Setup (Per Panel)

  • Set the TS/TSWs IP Address per your network requirements (If using a panel other than TSW-770 you will need the CI_ShowRunner-UI_v3.xx PUF)
  • Connect the PUF (CI_ShowRunner_v3.xx) to the TSW to load the UI
    • Only add CI_ShowRunner-UI_v3.xx if using touch panel other than TSW-770.   
  • When finished, connect to the TSW with Text Console and type “addm 10 x.x.x.x” to link the panel to the processor (where x.x.x.x is the processor’s IP or hostname [DHCP/DNS])
    • You can also edit the IP table from Toolbox or the touchpanel’s setup screen.  IP-IDs 10 and 11 are reserved for TSWs by default.  If you have more than 2 touchpanels the additional IP-IDs will be provided.