Startup Checklist

This is a broad-strokes checklist for what needs to be completed by a technician for a SHOWRUNNER™ startup. This checklist is not 100% comprehensive and does not go into detail for each step.

More detailed specifics and troubleshooting information are available in the SHOWRUNNER™ Startup Guide.

Startup Checklist:

• Before arriving on-site:
  • Ensure you have the required tools and software 
  • Ensure the jobsite is meets site readiness requirements
• Once on-site:
  • Configure IP settings for networked devices (processors, TSW touch panels, DIN-CENCN-2s, ZUMNET-JBOX, etc.)
  • Configure clock and timezone for processors
  • Update firmware for all networked devices
  • If necessary, update firmware for Zūm Net and Cresnet devices
  • Load SHOWRUNNER™ program to the processor
  • Load the SHOWRUNNER™ UI to any touchscreens
  • Load the SHOWRUNNER™ expansion program to any GLPACs
  • Poll Cresnet and verify devices are online in Toolbox
  • Assign Cresnet IDs to devices and verify they are reporting online to SHOWRUNNER™
  • Verify load schedule and fixture functionality
    • Verify loads are assigned to correct areas
    • Verify loads dim and switch correctly
    • Assign friendly load labels as necessary
  • Verify occupancy sensors
    • Verify correct area assignments
    • Adjust timeouts and sensitivities as necessary
  • Verify keypad functionality
    • Verify correct area assignments
    • Verify correct button layouts and functionality
  • Verify photocell functionality
    • Assign photocells to appropriate lighting zones and enable for required scenes
    • Adjust sensitivity as necessary
  • Verify partition sensor functionality
    • Verify correct area assignments
    • Adjust sensitivity as required
  • Set up any schedules as required per the sequence of operations
  • Complete functionality test (QC, make sure each room functions from an end-user perspective)
  • End-user training