Wiki source code of ShowRunnerCLC™ BACnet

Version 27.1 by Mark Kohlmann on 2023/07/21 21:35

version	line-number	content
26.1	1	ShowRunnerCLC™ uses Crestron's BACnet/IP stack and is bound by its licensing and limits. ShowRunnerCLC™'s BACnet feature is licensed, a license from Chief Integrations is required. Integrations of 50 points or less may use the free Crestron BACnet license. More than 50 points require the Crestron paid license and total points are limited by the platform (ZUM-HUB4 processors include a BACnet license, but require a separate license from Crestron to enable ShowRunnerCLC™ installation on the processor). The processor itself consumes a point. BACnet points are assigned during commissioning. A .csv export of the points may be downloaded from the system.
2.1	2
19.1	3	BACnet Stack Features:
18.1	4
26.1	5	* BACnet/IP
	6	* Configurable BACnet UDP port (options may be limited by processor firmware)
19.1	7	* BBMD w/ Foreign Device Registration (Enabled if necessary)
	8	* Points can be discovered using traditional BACnet discovery tools
	9
3.1	10	=== Crestron BACnet Stack Details ===
2.1	11
13.1	12	\|=Control System\|=Max # of Points
2.1	13	\|(((
	14	* FT-TSC600 (Not Supported by SR)
	15	* TPCS-4SM (Not Supported by SR)
	16	* TPCS-4SMD (Not Supported by SR)
	17	* TSCW-730 (Not Supported by SR)
	18	)))\|250
	19	\|(((
	20	* DIN-AP3
7.1	21	* DIN-AP4
2.1	22	* DIN-AP3MEX
	23	* MC3 (Not Supported by SR)
13.1	24	* MC4
2.1	25	* RMC3
7.1	26	* RMC4
2.1	27	)))\|500
	28	\|(((
	29	* CP3
7.1	30	* CP4
2.1	31	* CP3N
7.1	32	* CP4N
2.1	33	)))\|1000
	34	\|(((
	35	* AV3
7.1	36	* AV4
2.1	37	* PRO3
7.1	38	* PRO4
2.1	39	)))\|2000
20.1	40	\|(((
	41	* ZUM-HUB4
	42	)))\|10,000
2.1	43
	44	[[Crestron PICS Statement>>attach:Crestron_PICS.PDF]]
	45
23.1	46	=== ShowRunnerCLC™ BACnet Points ===
2.1	47
17.1	48	==== Area BACnet Points ====
10.1	49
23.1	50	Provides control/status for a single area within ShowRunnerCLC™. AreaBaseIDs are assigned automatically and maintained. Points are discoverable. Each of the points may be enabled or disabled by area to optimize the integration. This is the default ShowRunnerCLC™ BACnet mode.
2.1	51
25.1	52	{{{Offset is 1000 in configs generated in ShowRunner 3.30 or newer (V2 definition). Offset is 10000 in older configs or using V1 definition.
	53	AreaBaseID = BACnetIndex * Offset}}}
22.1	54
8.1	55	\|=Feature\|=Description\|=Type\|=Point\|=Label\|=R/W\|=Units
27.1	56	\|Area Scene\|Current Scene Active on the Area / Change Scene\|MV\|AreaBaseID\|{AreaId}:{AreaName} Scene\|RW\|Scene
	57	\|Occupancy Mode\|Current Occupancy Mode for the Area / Change Occupancy Mode\|MV\|AreaBaseID + 2\|{AreaId}:{AreaName} Occupancy Mode\|RW\|Mode
8.1	58	\|Occupancy Status\|Current Occupancy Status for the Area\|BI\|AreaBaseID + 1\|{AreaId}:{AreaName} Occupied\|R\|Boolean
13.1	59	\|Area Intensity\|Current Area Average Intensity/Load Level (v3.010 or later)\|AV\|AreaBaseID + 3\|{AreaId}:{AreaName} Intensity\|RW\|Percentage
27.1	60	\|Area Power\|Current Area Power Consumption in Watts (Requires SR EM License & v3.010 or later)\|AI\|AreaBaseID + 4\|{AreaId}:{AreaName} Power\|R\|Watts
24.1	61	\|Loads\|Individual Load intensities for each Load in the Area\|AV\|AreaBaseID + (V2: 100, V1: 1000) + LoadIndex\|{AreaId}:{AreaName} Load{LoadId}:{LoadName}\|RW\|Percentage
	62	\|Photocell Level\|Photocell sensor reading for each Photocell in the Area\|AI\|AreaBaseID + (V2: 50, V1: 100) + PhotocellIndex\|{AreaId}:{AreaName} Photocell{PhotocellId}:{PhotocellName}\|R\|Percentage
2.1	63
17.1	64	==== Global BACnet Points ====
10.1	65
	66	\|=Feature\|=Description\|=Type\|=Point\|=Label\|=R/W\|=Units
	67	\|Master Override\|Activates or Deactivates Master Override System Wide\|BV\|10\|Master Override\|RW\|Boolean
	68	\|Demand Response\|Activates or Deactivates Demand Response\|BV\|11\|Demand Response\|RW\|Boolean
16.1	69	\|Normal / After Hours\|Changes System State between Normal and After Hours\|MV\|12\|Normal / After Hours\|RW\|(((
	70	1: Normal
	71	2: After Hours
	72	)))
10.1	73	\|Device Offline Count\|Indicates the number of devices that are offline\|AV\|20\|Device Offline Count\|R\|Integer
	74	\|Alarm\|Indicates a critical failure, see user interface for more information\|BV\|21\|Alarm\|R\|Boolean
	75
20.1	76	=== Zūm Floor Hub BACnet Point Emulation ===
5.1	77
26.1	78	ShowRunnerCLC™ can emulate the Zūm Floor Hubs BACnet points as an alternative to the standard ShowRunnerCLC™ mode. Each point may be enabled/disabled individually by Area. ShowRunner does not expose every point per area that the Zum Hub does, just the points listed below are exposed.
5.1	79
	80	Set the following Area properties:
	81
26.1	82	{{{BACnetIndex: (ID of the Room, this number of multiplied by 2048 to get the BACnet points, starts at 1)
	83	BACnetMode: "ZumEmulation"
5.1	84
26.1	85	AreaBaseID = BACnetIndex * 2048}}}
5.1	86
	87	\|=Feature\|=(% style="width: 149px;" %)Type\|=(% style="width: 341px;" %)Point\|=Label\|=Description\|=R/W\|=Units
	88	\|Area Scene\|(% style="width:149px" %)MV\|(% style="width:341px" %)AreaBaseID + 8\|{AreaName}>{AreaId}>ActiveScene>BI\|View or change the current scene. Off scene is 17, Scenes 1 through 16 depend on area configuration.\|RW\|Scene
	89	\|Occupancy Mode\|(% style="width:149px" %)BV\|(% style="width:341px" %)AreaBaseID + 6\|{AreaName}>{AreaId}>OccupancySensorEnabled>BV\|Enable or disable the occupancy sensor. Enable will activate the last occupancy/vacancy mode.\|RW\|Boolean
	90	\|Occupancy Status\|(% style="width:149px" %)BI\|(% style="width:341px" %)AreaBaseID + 2\|{AreaName}>{AreaId}>RoomOccupied>BI\|Current room occupancy state\|R\|Boolean
	91	\|Online\|(% style="width:149px" %)BI\|(% style="width:341px" %)AreaBaseID\|{AreaName}>{AreaId}>RoomOnline>BI\|Current room online state, this is fixed as true.\|R\|Boolean
	92	\|On\|(% style="width:149px" %)BI\|(% style="width:341px" %)AreaBaseID + 1\|{AreaName}>{AreaId}>RoomOn>BI\|Current room load state. If any load is on this will be true.\|R\|Boolean
	93
26.1	94	{{{
	95	}}}