Changes for page ShowRunnerCLC™ BACnet

Summary

• Page properties (4 modified, 0 added, 0 removed)

Details

Page properties

Title

...	...	@@ -1,1 +1,1 @@
1		-ShowRunner BACnet
	1	+ShowRunnerCLC™ BACnet

Parent

...	...	@@ -1,1 +1,1 @@
1		-SHOWRUNNER™ User Guide & Wiki.SHOWRUNNER™ Appendix.WebHome
	1	+SHOWRUNNER™ Integrations Guide.Integration Options.WebHome

Author

...	...	@@ -1,1 +1,1 @@
1		-XWiki.mark\.kohlmann@chiefintegrations\.com
	1	+XWiki.alexander\.mott@chiefintegrations\.com

Content

...	...	@@ -1,8 +1,20 @@
1		-ShowRunner uses Crestron's BACnet stack and is bound by its licensing and limits.  ShowRunner's BACnet feature is licensed.  Integrations of 50 points or less may use the free Crestron BACNET license.  More than 50 points require the Crestron paid license and total points are limited by the platform.  The processor itself consumes a point.
	1	+ShowRunnerCLC™ uses Crestron's BACnet/IP stack and is bound by its licensing and limitations. Integrations of 50 points or less may use the free Crestron BACnet license, while integrations with more than 50 points require the Crestron paid license (ZUM-HUB4 processors include a BACnet license, but require a separate license from Crestron to enable ShowRunnerCLC™ installation on the processor). The maximum number of BACnet points available is limited per processor and detailed in the table below (note that the processor itself consumes a point).
2	2
	3	+ShowRunnerCLC™'s BACnet feature is licensed, and an additional license from Chief Integrations is required. BACnet points are automatically created and assigned during commissioning, and a .csv export of the points may be downloaded from the system. It is recommended to wait until after ShowRunnerCLC™ has been fully started up to provide BACnet points to third parties as changes to the ShowRunnerCLC™ program made during start-up may affect the names and IDs for automatically generated BACnet points.
	4	+
	5	+ShowRunnerCLC™ version 3.050 and newer includes support for fully customized BACnet points, but it is labor intensive to implement. Discuss with Chief Integrations if you believe your job requires custom BACnet points (e.g. upgrading a non-ShowRunnerCLC™ system with existing BACnet integrations to ShowRunnerCLC™).
	6	+
	7	+BACnet Stack Features:
	8	+
	9	+* BACnet/IP
	10	+* Configurable BACnet UDP port (options may be limited by processor firmware)
	11	+* BBMD w/ Foreign Device Registration (Enabled if necessary)
	12	+* Points can be discovered using traditional BACnet discovery tools
	13	+* ShowRunnerCLC™ version 3.050 and later support custom BACnet points. Please discuss with Chief Integrations.
	14	+
3	3	=== Crestron BACnet Stack Details ===
4	4
5		-|=Control System|=Max # of Objects
	17	+|=Control System|=Max # of Points
6	6	|(((
7	7	* FT-TSC600 (Not Supported by SR)
8	8	* TPCS-4SM (Not Supported by SR)
...	...	@@ -11,41 +11,71 @@
11	11	)))|250
12	12	|(((
13	13	* DIN-AP3
	26	+* DIN-AP4
14	14	* DIN-AP3MEX
15	15	* MC3 (Not Supported by SR)
	29	+* MC4
16	16	* RMC3
	31	+* RMC4
17	17	)))|500
18	18	|(((
19	19	* CP3
	35	+* CP4
20	20	* CP3N
	37	+* CP4N
21	21	)))|1000
22	22	|(((
23	23	* AV3
	41	+* AV4
24	24	* PRO3
	43	+* PRO4
25	25	)))|2000
	45	+|(((
	46	+* ZUM-HUB4
	47	+)))|9,000
26	26
27	27	[[Crestron PICS Statement>>attach:Crestron_PICS.PDF]]
28	28
29		-=== ShowRunner BACNET Points ===
	51	+=== ShowRunnerCLC™ BACnet Points ===
30	30
31		-AreaBaseIDs are assigned automatically and maintained.  Points are discoverable.  Each of the points may be enabled or disabled by area to optimize the integration.  This the default ShowRunner BACnet mode.
	53	+==== Area BACnet Points ====
32	32
33		-|=Feature|=Type|=Point|=Label|=R/W|=Units
34		-|Area Scene|MV|AreaBaseID|{AreaId}:{AreaName} Scene|RW|Scene
35		-|Occupancy Mode|MV|AreaBaseID + 2|{AreaId}:{AreaName} Occupancy Mode|RW|Mode
36		-|Occupancy Status|BI|AreaBaseID + 1|{AreaId}:{AreaName} Occupied|R|Boolean
37		-|Loads|AV|AreaBaseID + 1000 + LoadIndex|{AreaId}:{AreaName} Load{LoadId}:{LoadName}|RW|Percentage
38		-|Photocell Level|AI|AreaBaseID + 100 + PhotocellIndex|{AreaId}:{AreaName} Photocell{PhotocellId}:{PhotocellName}|R|Percentage
	55	+Provides control/status for a single area within ShowRunnerCLC™. AreaBaseIDs are assigned automatically and maintained. Points are discoverable. Each of the points may be enabled or disabled by area to optimize the integration. This is the default ShowRunnerCLC™ BACnet mode.
39	39
40		-=== Zum Floor Hub BACnet Point Emulation ===
	57	+{{{Offset is 1000 in configs generated in ShowRunner 3.30 or newer (V2 definition). Offset is 10000 in older configs or using V1 definition.
	58	+AreaBaseID = BACnetIndex * Offset}}}
41	41
42		-ShowRunner can emulate the Zum Floor Hubs BACnet points.
	60	+|=Feature|=Description|=Type|=Point|=Label|=R/W|=Units
	61	+|Area Scene|Current Scene Active on the Area / Change Scene|MV|AreaBaseID|{AreaId}:{AreaName} Scene|RW|Scene
	62	+|Occupancy Mode|Current Occupancy Mode for the Area / Change Occupancy Mode|MV|AreaBaseID + 2|{AreaId}:{AreaName} Occupancy Mode|RW|Mode
	63	+|Occupancy Status|Current Occupancy Status for the Area|BI|AreaBaseID + 1|{AreaId}:{AreaName} Occupied|R|Boolean
	64	+|Area Intensity|Current Area Average Intensity/Load Level (v3.010 or later)|AV|AreaBaseID + 3|{AreaId}:{AreaName} Intensity|RW|Percentage
	65	+|Area Power|Current Area Power Consumption in Watts (Requires SR EM License & v3.010 or later)|AI|AreaBaseID + 4|{AreaId}:{AreaName} Power|R|Watts
	66	+|Loads|Individual Load intensities for each Load in the Area|AV|AreaBaseID + (V2: 100, V1: 1000) + LoadIndex|{AreaId}:{AreaName} Load{LoadId}:{LoadName}|RW|Percentage
	67	+|Photocell Level|Photocell sensor reading for each Photocell in the Area|AI|AreaBaseID + (V2: 50, V1: 100) + PhotocellIndex|{AreaId}:{AreaName} Photocell{PhotocellId}:{PhotocellName}|R|Percentage
43	43
	69	+==== Global BACnet Points ====
	70	+
	71	+|=Feature|=Description|=Type|=Point|=Label|=R/W|=Units
	72	+|Master Override|Activates or Deactivates Master Override System Wide|BV|10|Master Override|RW|Boolean
	73	+|Demand Response|Activates or Deactivates Demand Response|BV|11|Demand Response|RW|Boolean
	74	+|Normal / After Hours|Changes System State between Normal and After Hours|MV|12|Normal / After Hours|RW|(((
	75	+1: Normal
	76	+2: After Hours
	77	+)))
	78	+|Device Offline Count|Indicates the number of devices that are offline|AV|20|Device Offline Count|R|Integer
	79	+|Alarm|Indicates a critical failure, see user interface for more information|BV|21|Alarm|R|Boolean
	80	+
	81	+=== Zūm Floor Hub BACnet Point Emulation ===
	82	+
	83	+ShowRunnerCLC™ can emulate the Zūm Floor Hubs BACnet points as an alternative to the standard ShowRunnerCLC™ mode. Each point may be enabled/disabled individually by Area.  ShowRunner does not expose every point per area that the Zum Hub does, just the points listed below are exposed.
	84	+
44	44	Set the following Area properties:
45	45
46		-{{{BACnetIndex: (ID of the Room, this number of multiplied times 2048 to get the BACnet points, start at 1)
47		-BACnetMode: "ZumEmulation"}}}
	87	+{{{BACnetIndex: (ID of the Room, this number of multiplied by 2048 to get the BACnet points, starts at 1)
	88	+BACnetMode: "ZumEmulation"
48	48
	90	+AreaBaseID = BACnetIndex * 2048}}}
49	49
50	50	|=Feature|=(% style="width: 149px;" %)Type|=(% style="width: 341px;" %)Point|=Label|=Description|=R/W|=Units
51	51	|Area Scene|(% style="width:149px" %)MV|(% style="width:341px" %)AreaBaseID + 8|{AreaName}>{AreaId}>ActiveScene>BI|View or change the current scene.  Off scene is 17, Scenes 1 through 16 depend on area configuration.|RW|Scene
...	...	@@ -54,4 +54,5 @@
54	54	|Online|(% style="width:149px" %)BI|(% style="width:341px" %)AreaBaseID|{AreaName}>{AreaId}>RoomOnline>BI|Current room online state, this is fixed as true.|R|Boolean
55	55	|On|(% style="width:149px" %)BI|(% style="width:341px" %)AreaBaseID + 1|{AreaName}>{AreaId}>RoomOn>BI|Current room load state.  If any load is on this will be true.|R|Boolean
56	56
57		-{{{AreaBaseID = BACnetIndex * 2048}}}
	99	+{{{
	100	+ }}}