Skip to Content
Last modified by Alexander Mott on 2025/06/13 15:26
From version 33.1
edited by Alexander Mott
on 2025/06/13 15:26
Change comment: There is no comment for this version
To version 32.1
edited by Alexander Mott
on 2023/07/07 15:17
Change comment: There is no comment for this version

Summary

Details

Page properties
Content
... ... @@ -1,7 +1,4 @@
1 -(% class="box warningmessage" id="HUseShowRunnerCLC2122version3.010orlater" %)
2 -(((
3 -Use ShowRunnerCLC™ version 3.010 or later.
4 -)))
1 +===== Use ShowRunnerCLC™ version 3.010 or later =====
5 5  
6 6  Terminology:
7 7  
... ... @@ -27,7 +27,7 @@
27 27  11. On host, verify the client shows up as a web session: ##sr sh lwapi serv cli##
28 28  11. On client, verify the session with the host: ##sr sh lwapi cli br##
29 29  
30 -=== Host processor (LWAPI Server) Setup (e.g. DIN-AP3 @ 10.44.5.91) ===
27 +===== Host processor (LWAPI Server) Setup (e.g. DIN-AP3 @ 10.44.5.91) =====
31 31  
32 32  Steps 1-3 and 5 always needed.
33 33  
... ... @@ -48,10 +48,8 @@
48 48  'lwapi' was successfully added to group 'Users'.##
49 49  1. Save the configuration
50 50  
51 -=== Client processor (LWAPI Client) Setup (e.g. DIN-AP4) ===
48 +===== Client processor (LWAPI Client) Setup (e.g. DIN-AP4) Version 3.011 or newer =====
52 52  
53 -==== ShowRunnerCLC™ 3.011 or newer ====
54 -
55 55  Steps 1-3 always needed. **Note:** host and client processors must be able to communicate with each other to use this method (i.e. the network must be configured and both processors must have SHOWRUNNER™ program and configuration loaded).
56 56  
57 57  1. Define remote system in the config:
... ... @@ -71,7 +71,7 @@
71 71  Success##
72 72  1. Save the configuration
73 73  
74 -==== ShowRunnerCLC™ v3.010 or earlier ====
69 +===== Client processor (LWAPI Client) Setup (e.g. DIN-AP4) Version 3.010 or earlier =====
75 75  
76 76  Steps 1-3 and 6 always needed.
77 77