Skip to Content
Last modified by Alexander Mott on 2025/06/13 15:26
From version 32.1
edited by Alexander Mott
on 2023/07/07 15:17
Change comment: There is no comment for this version
To version 33.1
edited by Alexander Mott
on 2025/06/13 15:26
Change comment: There is no comment for this version

Summary

Details

Page properties
Content
... ... @@ -1,4 +1,7 @@
1 -===== Use ShowRunnerCLC™ version 3.010 or later =====
1 +(% class="box warningmessage" id="HUseShowRunnerCLC2122version3.010orlater" %)
2 +(((
3 +Use ShowRunnerCLC™ version 3.010 or later.
4 +)))
2 2  
3 3  Terminology:
4 4  
... ... @@ -24,7 +24,7 @@
24 24  11. On host, verify the client shows up as a web session: ##sr sh lwapi serv cli##
25 25  11. On client, verify the session with the host: ##sr sh lwapi cli br##
26 26  
27 -===== Host processor (LWAPI Server) Setup (e.g. DIN-AP3 @ 10.44.5.91) =====
30 +=== Host processor (LWAPI Server) Setup (e.g. DIN-AP3 @ 10.44.5.91) ===
28 28  
29 29  Steps 1-3 and 5 always needed.
30 30  
... ... @@ -45,8 +45,10 @@
45 45  'lwapi' was successfully added to group 'Users'.##
46 46  1. Save the configuration
47 47  
48 -===== Client processor (LWAPI Client) Setup (e.g. DIN-AP4) Version 3.011 or newer =====
51 +=== Client processor (LWAPI Client) Setup (e.g. DIN-AP4) ===
49 49  
53 +==== ShowRunnerCLC™ 3.011 or newer ====
54 +
50 50  Steps 1-3 always needed. **Note:** host and client processors must be able to communicate with each other to use this method (i.e. the network must be configured and both processors must have SHOWRUNNER™ program and configuration loaded).
51 51  
52 52  1. Define remote system in the config:
... ... @@ -66,7 +66,7 @@
66 66  Success##
67 67  1. Save the configuration
68 68  
69 -===== Client processor (LWAPI Client) Setup (e.g. DIN-AP4) Version 3.010 or earlier =====
74 +==== ShowRunnerCLC™ v3.010 or earlier ====
70 70  
71 71  Steps 1-3 and 6 always needed.
72 72