Skip to Content
Last modified by Alexander Mott on 2023/07/07 15:17
From version 32.1
edited by Alexander Mott
on 2023/07/07 15:17
Change comment: There is no comment for this version
To version 28.1
edited by Alexander Mott
on 2022/10/18 20:53
Change comment: There is no comment for this version

Summary

Details

Page properties
Title
... ... @@ -1,1 +1,1 @@
1 -CoAP ShowRunner to ShowRunnerCLC™ Setup Instructions
1 +CoAP ShowRunner to ShowRunner Setup Instructions
Content
... ... @@ -1,8 +1,8 @@
1 -===== Use ShowRunnerCLC™ version 3.010 or later =====
1 +===== Use ShowRunner version 3.010 or later =====
2 2  
3 3  Terminology:
4 4  
5 -* Client Processor - Processor that will interact with hardware attached to the host processor.
5 +* Client Processor - Processor that will interact with hardware attached to the host procesor.
6 6  * CWS - Crestron Web Server, the processor's internal web server
7 7  * Host Processor (Server) - Processor that hosts the physical hardware
8 8  * LWAPI - Lightweight API (CoAP)
... ... @@ -20,9 +20,6 @@
20 20  11. Define the remote system
21 21  11. Setup auth for the remote system
22 22  11. Save the configuration
23 -1. Verify successful communications with the following commands:
24 -11. On host, verify the client shows up as a web session: ##sr sh lwapi serv cli##
25 -11. On client, verify the session with the host: ##sr sh lwapi cli br##
26 26  
27 27  ===== Host processor (LWAPI Server) Setup (e.g. DIN-AP3 @ 10.44.5.91) =====
28 28  
... ... @@ -50,14 +50,12 @@
50 50  Steps 1-3 always needed. **Note:** host and client processors must be able to communicate with each other to use this method (i.e. the network must be configured and both processors must have SHOWRUNNER™ program and configuration loaded).
51 51  
52 52  1. Define remote system in the config:
53 -## "RemoteSystems": [
54 - {
55 - "SystemId": (% style="color:darkcyan" %)1(%%),
56 - "IpAddressOrHostname": "10.44.5.91",
57 - "Label": "HUB-1-1",
58 - "ConnectionType": "LWAPI"
59 - },
60 - ],##
50 +## {
51 + "SystemId": (% style="color:darkcyan" %)1(%%),
52 + "IpAddressOrHostname": "10.44.5.91",
53 + "Label": "HUB-1-1",
54 + "ConnectionType": "LWAPI"
55 + },##
61 61  1. Add Users :
62 62  if CWS User is not needed:
63 63  ##DIN-AP4>sr remote system auth (% style="color:darkcyan" %)**1**(%%) (% style="color:blue" %)**YTd2pQn7sjwiOWD9NqCIWw**(%%) (% style="color:orange" %)**OeiQEFo_-EDfc7sQe_qRpeQzSkZjylV2roa76utpJLI**(%%)##
... ... @@ -71,14 +71,12 @@
71 71  Steps 1-3 and 6 always needed.
72 72  
73 73  1. Define remote system in the config:
74 -## "RemoteSystems": [
75 - {
76 - "SystemId": (% style="color:darkcyan" %)1(%%),
77 - "IpAddressOrHostname": "10.44.5.91",
78 - "Label": "HUB-1-1",
79 - "ConnectionType": "LWAPI"
80 - },
81 - ],##
69 +## {
70 + "SystemId": (% style="color:darkcyan" %)1(%%),
71 + "IpAddressOrHostname": "10.44.5.91",
72 + "Label": "HUB-1-1",
73 + "ConnectionType": "LWAPI"
74 + },##
82 82  1. Add remote user for LWAPI (this is the key and secret created on the host):
83 83  ##DIN-AP4>sradmin add remote user HUB-1 (% style="color:blue" %)**YTd2pQn7sjwiOWD9NqCIWw**(%%) (% style="color:orange" %)**OeiQEFo_-EDfc7sQe_qRpeQzSkZjylV2roa76utpJLI**(%%)
84 84  Remote User HUB-1 ((% style="color:green" %)//**1a920b8b-3ab8-44bd-bc7b-0fc77abf0a13**//(%%)) added with Group permissions Remote Connection##