Skip to Content
Last modified by Alexander Mott on 2023/07/07 15:17
From version 29.1
edited by Alexander Mott
on 2022/11/17 16:58
Change comment: There is no comment for this version
To version 20.1
edited by Mark Kohlmann
on 2021/10/27 02:00
Change comment: There is no comment for this version

Summary

Details

Page properties
Parent
... ... @@ -1,1 +1,1 @@
1 -SHOWRUNNER™ Integrations Guide.Integration Options.CoAP with Crestron S# Library and Modules.WebHome
1 +SHOWRUNNER™ User Guide & Wiki.SHOWRUNNER™ Appendix.Integration Options.CoAP with Crestron S# Library and Modules.WebHome
Author
... ... @@ -1,1 +1,1 @@
1 -XWiki.alexander\.mott@chiefintegrations\.com
1 +XWiki.mark\.kohlmann@chiefintegrations\.com
Content
... ... @@ -1,41 +1,15 @@
1 1  ===== Use ShowRunner version 3.010 or later =====
2 2  
3 -Terminology:
4 4  
5 -* Client Processor - Processor that will interact with hardware attached to the host procesor.
6 -* CWS - Crestron Web Server, the processor's internal web server
7 -* Host Processor (Server) - Processor that hosts the physical hardware
8 -* LWAPI - Lightweight API (CoAP)
9 -* User Page Auth - Requires a username and password to access the internal web server (CWS) on the processor.  3-series always has this enabled if authentication is activated.  4-series processors have an option to have user page auth on or not (default is off).
4 +===== Host processor (LWAPI Server) Setup (DIN-AP3 @ 10.44.5.91) =====
10 10  
11 -Steps:
12 -
13 -1. [[Setup Host Processor>>WebHome||anchor="Host processor (LWAPI Server) Setup (DIN-AP3 @ 10.44.5.91)"]]
14 -11. Verify processor configuration
15 -11. Verify LWAPI is enabled
16 -11. Create API User
17 -11. Create CWS User (if necessary)
18 -11. Save the configuration
19 -1. [[Setup Client Processor>>WebHome||anchor="Client processor (LWAPI Client) Setup (DIN-AP4) Version 3.011 or newer"]]
20 -11. Define the remote system
21 -11. Setup auth for the remote system
22 -11. Save the configuration
23 -1. Verify successful communications with the following commands:
24 -11. On host, verify the client shows up as a web session: ##sradmin sh web sess##
25 -11. On client, verify the session with the host: ##sr sh lwapi cli br##
26 -
27 -===== Host processor (LWAPI Server) Setup (e.g. DIN-AP3 @ 10.44.5.91) =====
28 -
29 29  Steps 1-3 and 5 always needed.
30 30  
31 31  1. If 3-series, Enable Authentication [##authentication on##] or SSL [##ssl self##] if not already enabled.  4-Series have authentication enabled by default.  User Page Auth should be turned off on 4-series.
32 -1. Enable LWAPI
33 -From Console (v 3.011 or later; processor will automatically restart):
34 -## sr lwapi enable true##
35 -In Config (@ root level; reloading the configuration is required):
9 +1. Enable LWAPI In Config (@ root level):
36 36  ## "LwApiEnable": true,
37 37   "LwApiSecurityLevel": "Auth",##
38 -1. Create an API User and record the Key and Secret.  User group must have //LWAPI //role and //Execute //permissions.  This allows the  //Lightweight API Users// group has been created for this purpose:
12 +1. Create an API User and record the Key and Secret.  User group must have //LWAPI //role and //Execute //permissions.  //Lightweight API Users// group has been created for this purpose:
39 39  ##DIN-AP3>sradmin add api user "Central Control" "Lightweight API Users"
40 40  API User Central Control generated with Group permissions Lightweight API Users and Key: (% style="color:blue" %)**YTd2pQn7sjwiOWD9NqCIWw**(%%) Secret: (% style="color:orange" %)**OeiQEFo_-EDfc7sQe_qRpeQzSkZjylV2roa76utpJLI**(%%)##
41 41  1. If 3-series w/ auth enabled or 4-series with user page auth enabled then add a remote user with permissions to connect to the control system.  This is done by adding a local user to the system with user privileges.  Sample values shown, do not re-use these.
... ... @@ -45,9 +45,9 @@
45 45  'lwapi' was successfully added to group 'Users'.##
46 46  1. Save the configuration
47 47  
48 -===== Client processor (LWAPI Client) Setup (e.g. DIN-AP4) Version 3.011 or newer =====
22 +===== Client processor (LWAPI Client) Setup (DIN-AP4) Version 3.011 or newer =====
49 49  
50 -Steps 1-3 always needed. **Note:** host and client processors must be able to communicate with each other to use this method (i.e. the network must be configured and both processors must have SHOWRUNNER™ program and configuration loaded).
24 +Steps 1-3 and 6 always needed.
51 51  
52 52  1. Define remote system in the config:
53 53  ## {
... ... @@ -64,7 +64,7 @@
64 64  Success##
65 65  1. Save the configuration
66 66  
67 -===== Client processor (LWAPI Client) Setup (e.g. DIN-AP4) Version 3.010 or earlier =====
41 +===== Client processor (LWAPI Client) Setup (DIN-AP4) Version 3.010 or earlier =====
68 68  
69 69  Steps 1-3 and 6 always needed.
70 70