Skip to Content

How do I add a GLS-LCCT to a stand alone GL-IPAC-SW8?

Version 1.1 by Craig Lewis on 2023/06/08 14:01
  • GL-IPAC-SW8 firmware version 1.01.10 or later.
    • When using Crestron Toolbox™ software to update this firmware, check the box to also load the updated programming.
    • If the firmware update was successful, the physical screen on the GL-IPAC-SW8 will show v1.02.000.
  • GLS-LCCT firmware version 1.003.0002 or later.
  • Assign the GLS-LCCT a Cresnet® ID ranging from D0-D9. Do not set to the same ID as one of the a GLS-SIMs with a photocell.