Skip to Content

How do I add a GLS-LCCT to a stand alone GL-IPAC-SW8?

Last modified by Craig Lewis on 2023/06/08 14:04
  • GL-IPAC-SW8 firmware version 1.01.10 or later.
    • When using Crestron Toolbox™ software to update this firmware, check the box to also load the updated programming.
    • If the firmware update was successful, the physical screen on the GL-IPAC-SW8 will show v1.02.000.
  • GLS-LCCT firmware version 1.003.0002 or later.
  • Assign the GLS-LCCT a Cresnet® ID ranging from D0-D9.
  • GLS-SIMs use C0-C9, do not set to the LCCT to same ID# as one of the a GLS-SIMs.