Changes for page Crestron Zūm Wireless

Summary

• Page properties (4 modified, 0 added, 0 removed)

Details

Page properties

Parent

...	...	@@ -1,1 +1,1 @@
1		-SHOWRUNNER™ User Guide & Wiki.Design Guide.Hardware Design Guide.WebHome
	1	+Design Guide.Hardware Design Guide.WebHome

Author

...	...	@@ -1,1 +1,1 @@
1		-XWiki.mark\.kohlmann@chiefintegrations\.com
	1	+XWiki.scott\.kohlmann@chiefintegrations\.com

Hidden

...	...	@@ -1,1 +1,1 @@
1		-true
	1	+false

Content

...	...	@@ -1,15 +1,15 @@
1		-Crestron Zūm Wireless is a locally integrated lighting control system with various global control options.  Zūm rooms are self-contained control units with primary logic occurring at the room level.  Central control systems offer scheduling and management.  SHOWRUNNER™ provides a number of integrations options that allow the designer to optimize the solution design.
	1	+Crestron Zūm Wireless is a locally integrated lighting control system with various global control options.  Zūm rooms are self-contained control units with primary logic occurring at the room level.  Central control systems offer scheduling and management.  ShowRunnerCLC™ provides a number of integrations options that allow the designer to optimize the solution design.
2	2
3	3	==== Integration Options ====
4	4
5		-* **SHOWRUNNER™ Total Control** - The most comprehensive option.  Allows seamless (see [[Caveats>>||anchor="caveats"]]) integration of Zūm and non-Zūm Crestron lighting control products.  Extensive feature set allows centralized control and management of Zūm rooms.  Advanced scheduler provides more flexibility to the facility operator.  This solution replaces the ZUM-FLOOR-HUB in the system design.
6		-* **SHOWRUNNER™ + AVBRIDGE + Serial Port** - Provides scene setting and load control via a dedicated AVBRIDGE in each Zūm room.  Requires a dedicated serial port (C2N-IO/CEN-IO-COM2/etc) and a dedicated ZUMMESH-AVBRIDGE per room.
7		-* **SHOWRUNNER™ + ZUM-FLOOR-HUB** - Provides limited scene recall and room status for Zūm rooms paired with the Floor Hub.  SHOWRUNNER™ can export its own areas to the Floor Hub.
	5	+* **ShowRunnerCLC™ Total Control** - The most comprehensive option.  Allows seamless (see [[Caveats>>WebHome||anchor="caveats"]]) integration of Zūm and non-Zūm Crestron lighting control products.  Extensive feature set allows centralized control and management of Zūm rooms.  Advanced scheduler provides more flexibility to the facility operator.  This solution replaces the ZUM-FLOOR-HUB in the system design.
	6	+* **ShowRunnerCLC™ + AVBRIDGE + Serial Port** - Provides scene setting and load control via a dedicated AVBRIDGE in each Zūm room.  Requires a dedicated serial port (C2N-IO/CEN-IO-COM2/etc) and a dedicated ZUMMESH-AVBRIDGE per room.
	7	+* **ShowRunnerCLC™+ ZUM-FLOOR-HUB** - Provides limited scene recall and room status for Zūm rooms paired with the Floor Hub.  ShowRunnerCLC™ can export its own areas to the Floor Hub.
8	8
9	9	==== Feature Matrix ====
10	10
11	11	(% border="1" style="margin-left:auto; margin-right:auto" %)
12		-|=Feature|=SHOWRUNNER™ Total Control|=SHOWRUNNER™ + AVBRIDGE + Serial Port|=SHOWRUNNER™ (External Room Export) + ZUM-FLOOR-HUB (Mirror Driver)|=ZUM-FLOOR-HUB Only|=Zūm iOS/Android Setup App*
	12	+|=Feature|=ShowRunnerCLC™ Total Control|=ShowRunnerCLC™ + AVBRIDGE + Serial Port|=ShowRunnerCLC™ (External Room Export) + ZUM-FLOOR-HUB (Mirror Driver)|=ZUM-FLOOR-HUB Only|=Zūm iOS/Android Setup App*
13	13	|(% colspan="6" %)**Hardware Requirements**
14	14	|Requires JBOX with ZUMMESH-NETBRIDGE|Y|N|Y|Y|Y
15	15	|Requires ZUMMESH-GATEWAY|Y|N|Y|Y|N/A
...	...	@@ -21,7 +21,7 @@
21	21	Crestron SmartGraphics XPanel
22	22	HTML5 UI Under Development (Q2 2021)
23	23	)))|Crestron SmartGraphics XPanel
24		-HTML5 UI Under Development (Q2 2021)|SHOWRUNNER™ - Crestron SmartGraphics XPanel
	24	+HTML5 UI Under Development (Q2 2021)|ShowRunnerCLC™ - Crestron SmartGraphics XPanel
25	25	ZUM-FLOOR-HUB - HTML5 UI|HTML5 UI|N
26	26	|iOS/Android|Y, Crestron App (Paid Upgrade)|Y, Crestron App (Paid Upgrade)|Y, Crestron App (Paid Upgrade), Limited Features for Zūm Rooms|N|Y*
27	27	|Touchscreens (Crestron TSW series)|Y|Y|Y, Limited Features for Zūm Rooms|N|N
...	...	@@ -30,52 +30,56 @@
30	30	|Override Fade Time for Scene Recall ~*~*|Y|N|N|N|N
31	31	|Scene Save|Y ~*~*~*~*|Y ~*~*~*~*|N|N|Y
32	32	|Load Control|Y ~*~**/~*~*~*~**|Y ~*~**|N|N|Y
33		-|Demand Response|Y|N|Y, separate triggers for SHOWRUNNER™ and ZUM-FLOOR-HUB required|Y|N
	33	+|Demand Response|Y|N|Y, separate triggers for ShowRunnerCLC™ and ZUM-FLOOR-HUB required|Y|N
34	34	|Enable/Disable Occupancy|Y|Y|Y, from Floor Hub|Y|Y
35	35	|Override Occupancy Logic|Y|Y|N|N|N
36		-|Override|Y~*~*~*~*~*~*|N|Scene Recall only via ShowRunner|N|N/A
	36	+|Override|Y~*~*~*~*~*~*|N|Scene Recall only via ShowRunnerCLC™|N|N/A
37	37	|Plug Load On/Off|Y|Y|Y|Y|By Hardware
38	38	|Integration with Non-Zūm Crestron Hardware|Y|Y|N|N|N
39		-|Custom Zūm Keypad Programming|N|Y, Zūm AV Keypad Only|N|N|Y, within the limits of the hardware
40		-|New Feature Release Cycle|Aggressive|Aggressive|SHOWRUNNER™: Aggressive
	39	+|Custom Zūm Keypad Programming|(((
	40	+Y, per individual button (1 through 4)
	41	+AV Keypad not required (v3.004 or later)
	42	+[[Details>>doc:SHOWRUNNER™ Setup Guide.Troubleshooting Guide.Advanced Tools.Zummesh Keypad Custom Programming.WebHome]]
	43	+)))|Y, Zūm AV Keypad Only|N|N|Y, within the limits of the hardware
	44	+|New Feature Release Cycle|Aggressive|Aggressive|ShowRunnerCLC™: Aggressive
41	41	Floor Hub: 6-12 months|6-12 months|6-12 months
42	42	|Room Organization|(((
43	43	Under Development:
44	44	Building/Floor/Sub-Group/Area
45	45	Categorization to Filter by Category/Tag
46		-)))|See SHOWRUNNER™ Total Control|SHOWRUNNER™: See SHOWRUNNER™ Total Control
	50	+)))|See ShowRunnerCLC™ Total Control|ShowRunnerCLC™: See ShowRunnerCLC™ Total Control
47	47	Floor Hub: Category/Room|Category/Room|(((
48	48	N/A
49	49	)))
50		-|Room Discovery|Automatic Discovery of Gateways and NETBRIDGES|Pre-Configured at Order|SHOWRUNNER™: Pre-Configured at Order
51		-Floor Hub: Map Mirrored Rooms to SHOWRUNNER™ and Discovery External Rooms|Automatic Discovery of Gateways and NETBRIDGES|N/A
	54	+|Room Discovery|Automatic Discovery of Gateways and NETBRIDGES|Pre-Configured at Order|ShowRunnerCLC™: Pre-Configured at Order
	55	+Floor Hub: Map Mirrored Rooms to ShowRunnerCLC™ and Discovery External Rooms|Automatic Discovery of Gateways and NETBRIDGES|N/A
52	52	|Firmware Updates|PUF Tool
53	53	Automatic Support on Roadmap|(((
54	54	PUF Tool
55	55	Automatic Support on Roadmap
56		-)))|SHOWRUNNER™: PUF Tool
	60	+)))|ShowRunnerCLC™: PUF Tool
57	57	Floor Hub: Automatic, Internet Connection Required|Automatic, Internet Connection Required|N/A
58	58	|(% colspan="6" %)**Calendar/Scheduling**
59	59	|Logic Type|Event Driven
60	60	Profile Support (Under Development)|Event Driven
61		-Profile Support (Under Development)|SHOWRUNNER™: Event Driven
	65	+Profile Support (Under Development)|ShowRunnerCLC™: Event Driven
62	62	Floor Hub: Pattern assigned to Category|Pattern assigned to Category|N/A
63	63	|Astronomical Clock|Y|Y|Y, Per Category|Y, Per Category|N/A
64		-|Holidays|Pattern|Pattern|SHOWRUNNER™: Pattern
	68	+|Holidays|Pattern|Pattern|ShowRunnerCLC™: Pattern
65	65	Floor Hub: Hard Coded|Hard Coded|N/A
66		-|Custom Patterns|Y, Advanced Scheduler License|Y, Advanced Scheduler License|SHOWRUNNER™: Y, Advanced Scheduler License
	70	+|Custom Patterns|Y, Advanced Scheduler License|Y, Advanced Scheduler License|ShowRunnerCLC™: Y, Advanced Scheduler License
67	67	Floor Hub: N|N|N/A
68	68	|(% colspan="6" %)**Integrations**
69		-|A/V Integration: API|Y|Y|SHOWRUNNER™: Y
	73	+|A/V Integration: API|Y|Y|ShowRunnerCLC™: Y
70	70	Floor Hub: Limited|Limited|N/A
71		-|A/V Integration: Crestron EISC|Y|Y|SHOWRUNNER™: Y
	75	+|A/V Integration: Crestron EISC|Y|Y|ShowRunnerCLC™: Y
72	72	Floor Hub: N|N|N/A
73	73	|A/V Integration: RS-232|Y|Y|(((
74		-SHOWRUNNER™: Y
	78	+ShowRunnerCLC™: Y
75	75	Floor Hub: AVBRIDGE per Area
76	76	)))|AVBRIDGE per Area|N/A
77		-|BACNET|Y, SHOWRUNNER™ and Crestron Licenses Needed|Y, SHOWRUNNER™ and Crestron Licenses Needed|(((
78		-SHOWRUNNER™: SHOWRUNNER™ and Crestron Licenses Needed
	81	+|BACNET|Y, ShowRunnerCLC™ and Crestron Licenses Needed|Y, ShowRunnerCLC™ and Crestron Licenses Needed|(((
	82	+ShowRunnerCLC™: ShowRunnerCLC™ and Crestron Licenses Needed
79	79	Floor Hub: Y
80	80	)))|Y|N/A
81	81	|BACNET Features|(((
...	...	@@ -92,8 +92,8 @@
92	92	System Wide Override (Panic/Emergency)
93	93
94	94	~* More Features added upon request
95		-)))|See list for SHOWRUNNER™ Total Control|(((
96		-SHOWRUNNER™: See list for SHOWRUNNER™ Total Control
	99	+)))|See list for ShowRunnerCLC™ Total Control|(((
	100	+ShowRunnerCLC™: See list for ShowRunnerCLC™ Total Control
97	97	Floor Hub: See list for ZUM-FLOOR-HUB
98	98	)))|(((
99	99	Per Room Status:
...	...	@@ -111,32 +111,32 @@
111	111	)))|N/A
112	112	|BACNET Settings Scope
113	113	(What Points are Exposed)|Per Area|Per Area|(((
114		-SHOWRUNNER™: Per Area
	118	+ShowRunnerCLC™: Per Area
115	115	Floor Hub: Global
116	116	)))|Global|N/A
117		-|BACNET Points Supported|Depends on Crestron License and Hardware|Depends on Crestron License and Hardware|SHOWRUNNER™: Depends on Crestron License and Hardware
	121	+|BACNET Points Supported|Depends on Crestron License and Hardware|Depends on Crestron License and Hardware|ShowRunnerCLC™: Depends on Crestron License and Hardware
118	118	Floor Hub: 1000|1000|N/A
119	119	|Crestron Fusion|Y|Y|(((
120		-SHOWRUNNER™: Y
	124	+ShowRunnerCLC™: Y
121	121	Floor Hub: N
122	122	)))|N|N/A
123		-|Export to Zūm Floor Hub|Y, Licensed|Y, Licensed|SHOWRUNNER™: Y, Licensed|N/A|N/A
124		-|GLPAC|Y|Y|SHOWRUNNER™: Y
125		-Floor Hub: Via SHOWRUNNER™|N|N/A
	127	+|Export to Zūm Floor Hub|Y, Licensed|Y, Licensed|ShowRunnerCLC™: Y, Licensed|N/A|N/A
	128	+|GLPAC|Y|Y|ShowRunnerCLC™: Y
	129	+Floor Hub: Via ShowRunnerCLC™|N|N/A
126	126	|System to System Link|Y|Y|(((
127		-SHOWRUNNER™: Y
	131	+ShowRunnerCLC™: Y
128	128	Floor Hub: N
129	129	)))|N|N/A
130		-|Minimum NETBRIDGE Firmware|v1.12.0130 (PUF Zum MESHNET v1.06.09)|v1.010|N/A|See Crestron|See Crestron
131		-|Minimum Gateway Firmware|v1.4469.00011|N/A|N/A|See Crestron|See Crestron
132		-|Minimum SHOWRUNNER™ Version|2.198|2.198|N/A|N/A|N/A
	134	+|Minimum NETBRIDGE Firmware|v1.13.0020 (PUF Zum MESHNET v1.07.16)|v1.010|N/A|See Crestron|See Crestron
	135	+|Minimum Gateway Firmware|v1.4469.00022|N/A|N/A|See Crestron|See Crestron
	136	+|Minimum ShowRunnerCLC™ Version|2.198|2.198|N/A|N/A|N/A
133	133
134	134	{{{* Zūm Setup App works as long as the NETBRIDGE is physically near the iOS/Android device running the Zūm Setup App.
135		-** Fade time is automatically applied if scene is set longer than 1 second. Must be triggered from SHOWRUNNER™, cannot be triggered from Zūm keypad with current firmware (as of April 2020).
	139	+** Fade time is automatically applied if scene is set longer than 1 second. Must be triggered from ShowRunnerCLC™, cannot be triggered from Zūm keypad with current firmware (as of April 2020).
136	136	*** Zūm wireless does not support direct coupling of fade times and the behavior is different internally within the dimmer versus other Crestron products. Raise/Lower level accuracy is not guaranteed. For best performance when settings scenes, set the slider manually which will send exact levels to the dimmer.
137		-**** Zūm wireless scenes cannot presently be read on command. Scenes should be created and saved from SHOWRUNNER™ directly. Saved scenes are stored directly on the Zūm wireless dimmer and in ShowRunner. ShowRunner will query the NETBRIDGE after scene recall and attempt to build scene information but operations are done one at a time.
138		-***** Zūm wireless real time load status is not available.  Any changes to loads performed using the raise/lower functions in room will not be propagated back to ShowRunner.  Levels set by the daylight sensor with daylighting enabled will not be reported by ShowRunner.
139		-****** Zūm wireless does not support a true override but ShowRunner will disable keypads and occupancy sensors.
	141	+**** Zūm wireless scenes cannot presently be read on command. Scenes should be created and saved from ShowRunnerCLC™ directly. Saved scenes are stored directly on the Zūm wireless dimmer and in ShowRunnerCLC™. ShowRunner will query the NETBRIDGE after scene recall and attempt to build scene information but operations are done one at a time.
	142	+***** Zūm wireless real time load status is not available.  Any changes to loads performed using the raise/lower functions in room will not be propagated back to ShowRunner.  Levels set by the daylight sensor with daylighting enabled will not be reported by v. Sometimes delays in sending load levels occur. Feature is primarily intended for remotely setting scenes.
	143	+****** Zūm wireless does not support a true override but ShowRunnerCLC™ will disable keypads and occupancy sensors and recall scene 15. The occupancy sensor enabled state and current scene will be remembered and recalled when leaving occupancy mode.
140	140	}}}
141	141
142	142	{{id name="caveats"/}}
...	...	@@ -144,17 +144,17 @@
144	144	==== Caveats ====
145	145
146	146	* Consult Chief Integrations to verify sequence of operations if there are any concerns.  Zum wireless is not a direct replacement for Crestron wired and infiNET EX wireless products.
147		-* Zum Wireless has an internal rate limit that will shutdown communication if a number of commands are received in a short period of time.  This can be seen when repeatedly pressing buttons on a keypad as well as repeatedly triggering actions from ShowRunner.
	151	+* Zum Wireless has an internal rate limit that will shutdown communication if a number of commands are received in a short period of time.  This can be seen when repeatedly pressing buttons on a keypad as well as repeatedly triggering actions from ShowRunnerCLC™.
148	148	* Raise/Lower operations from ShowRunner cannot track directly with the load response, see ~*~** above.  ShowRunner will poll the NETBRIDGE for current levels ~~3 seconds after the raise/lower is stopped to obtain current load levels.
149	149	* Lower operations can turn the load off.  The load will not come on with a raise.  This is a firmware behavior in the Zum hardware.
150	150	* Wireless control presents some additional latency possibilities.  Commands required to provide full functionality (load control/raise/lower) with Zum wireless are more intensive than traditional Crestron hardware and may impact performance under heavy load.  Local operation of the Zum wireless room is not impacted.
151		-* Real time load status is not available.  Any changes to loads performed using the raise/lower functions in room will not be propagated back to ShowRunner.  Levels set by the daylight sensor with daylighting enabled will not be reported by ShowRunner.
152		-* Keypad behaviors cannot be modified in ShowRunner.  Some modifications are permitted within the Zum app.  Custom keypads can be implemented using the AVBRIDGE connected to the system via a serial port, Zum requires an AV specific keypad for this purpose.
	155	+* Real time load status is not available.  Any changes to loads performed using the raise/lower functions in room will not be propagated back to ShowRunnerCLC™.  Levels set by the daylight sensor with daylighting enabled will not be reported by ShowRunnerCLC™.
	156	+* Keypad behaviors cannot be modified in ShowRunnerCLC™.  Some modifications are permitted within the Zum app.  Custom keypads can be implemented using the AVBRIDGE connected to the system via a serial port, Zum requires an AV specific keypad for this purpose; or via export buttons ([[Details>>doc:SHOWRUNNER™ Setup Guide.Troubleshooting Guide.Advanced Tools.Zummesh Keypad Custom Programming.WebHome]]).
153	153	* Zum Partition Sensors do not report back to the system and cannot be used to handle room divide/combine logic externally to the linked Zum rooms.
154	154	* Off Scene cannot be saved and is always room Off
155	155	* Scenes 1 through 16 are supported and may be modified and saved.
156		-* Scenes with fade times greater than 1 second will result in loads being commanded individual from ShowRunner and may not be in sync depending on load quantity, RF gateway load, and RF signal integrity.  Zum hardware does not support a fade time as part of the Scene setting.  Fade times must be commanded from ShowRunner.  Scene fade times will be ignored when scenes are activated by Zum keypads or internal occupancy logic.
157		-* Saving scenes from ShowRunner captures the levels set in ShowRunner at the time of the save.  ShowRunner will attempt to learn scenes as they are recalled.
	160	+* Scenes with fade times greater than 1 second will result in loads being commanded individual from ShowRunnerCLC™ and may not be in sync depending on load quantity, RF gateway load, and RF signal integrity.  Zum hardware does not support a fade time as part of the Scene setting.  Fade times must be commanded from ShowRunnerCLC™.  Scene fade times will be ignored when scenes are activated by Zum keypads or internal occupancy logic.
	161	+* Saving scenes from ShowRunnerCLC™ captures the levels set in ShowRunnerCLC™ at the time of the save.  ShowRunner will attempt to learn scenes as they are recalled.
158	158	* Override/Override Level features are not supported
159	159	* Load disable is not supported
160	160	* After hours logic is not supported
...	...	@@ -161,8 +161,8 @@
161	161	* Blink before timeout is not supported
162	162	* CCT control is presently not supported (ZUMMESH-JBOX-DALI support may be available in the future)
163	163	* RGB loads are not supported
164		-* Minimum/Maximum Levels are not supported when loads are being recalled locally.  ShowRunner will honor them when control occurs from ShowRunner except for raise/lower which is performed on hardware.
165		-* Dimming curves are not supported when loads are being recalled locally.  Use Zum app to adjust dimming curves if necessary.  Recommended to leave ShowRunner dimming curve set to "Unaffected".
	168	+* Minimum/Maximum Levels are not supported when loads are being recalled locally.  ShowRunnerCLC™ will honor them when control occurs from ShowRunnerCLC™ except for raise/lower which is performed on hardware.
	169	+* Dimming curves are not supported when loads are being recalled locally.  Use Zum app to adjust dimming curves if necessary.  Recommended to leave ShowRunnerCLC™ dimming curve set to "Unaffected".
166	166	* BACNET support requires a processor hardware license and ShowRunner BACNET license.  BACNET point availability can be configured per Area.
167	167	* Chief Integrations recommends one 4-series (preferred) or 3-series processor per building floor at a minimum.
168	168	* Zummesh and infiNET EX devices are not officially supported on the same gateway, discuss with Crestron if needing both.
...	...	@@ -172,19 +172,19 @@
172	172
173	173	(% class="box" %)
174	174	(((
175		-**SHOWRUNNER™ Total Control**
	179	+**ShowRunnerCLC™ Total Control**
176	176	[[image:ZumSr\@2x.png||alt="Zum SHOWRUNNER™ Total Control Topology"]]
177	177	)))
178	178
179	179	(% class="box" %)
180	180	(((
181		-**SHOWRUNNER™ + AVBRIDGE + Serial Port**
	185	+**ShowRunnerCLC™ + AVBRIDGE + Serial Port**
182	182	[[image:ZumAvbSr\@2x.png||alt="Zum AVBRIDGE + SHOWRUNNER™ Topology"]]
183	183	)))
184	184
185	185	(% class="box" %)
186	186	(((
187		-**SHOWRUNNER™ (External Room Export) + ZUM-FLOOR-HUB (Mirror Driver)**
	191	+**ShowRunnerCLC™ (External Room Export) + ZUM-FLOOR-HUB (Mirror Driver)**
188	188	[[image:ZumFhSr\@2x.png||alt="Zum Floor Hub + SHOWRUNNER™ Topology"]]
189	189	)))
190	190