Changes for page Crestron Zūm Wired

Summary

• Page properties (1 modified, 0 added, 0 removed)

Details

Page properties

Content

...	...	@@ -9,7 +9,7 @@
9	9
10	10	==== Feature Matrix ====
11	11
12		-|=Feature|=SHOWRUNNER™ Total Control|=SHOWRUNNER™ (External Room Export) + ZUM-FLOOR-HUB (Mirror Driver)|=ZUM-FLOOR-HUB Only|=Zūm iOS/Android Setup App*
	12	+|=Feature|=SHOWRUNNER™ Total Control|=SHOWRUNNER™ (External Room Export) + ZUM-FLOOR-HUB4 (Mirror Driver)|=ZUM-FLOOR-HUB4 Only|=Zūm iOS/Android Setup App*
13	13	|(% colspan="5" %)**Hardware Requirements**
14	14	|Requires ZUMNET JBox|Y|Y|Y|N
15	15	|Requires 3 or 4-Series Control System|Y|Y|N|N/A
...	...	@@ -19,7 +19,7 @@
19	19	|Web Browser|(((
20	20	Crestron SmartGraphics XPanel
21	21	HTML5 UI
22		-)))|SHOWRUNNER™ - Crestron SmartGraphics XPanel
	22	+)))|SHOWRUNNER™ - Crestron SmartGraphics XPanel/HTML5 UI
23	23	ZUM-FLOOR-HUB - HTML5 UI|HTML5 UI|N
24	24	|iOS/Android|Y, Crestron App (Paid Upgrade)|Y, Crestron App (Paid Upgrade), Limited Features for Zūm Rooms|N|Y*
25	25	|Touchscreens (Crestron TSW series)|Y|Y, Limited Features for Zūm Rooms|N|N
...	...	@@ -44,7 +44,7 @@
44	44	Floor Hub: Category/Room|Category/Room|(((
45	45	N/A
46	46	)))
47		-|Room Discovery|Automatic Discovery of ZUMNET and ZUMLINK devices|SHOWRUNNER™: Automatic discovery
	47	+|Room Discovery|Automatic Discovery of ZUMNET and ZUMLINK devices (Pending)|SHOWRUNNER™: Automatic discovery (Pending)
48	48	Floor Hub: Map Mirrored Rooms to SHOWRUNNER™ and Discovery External Rooms|Automatic Discovery of ZUMNET and ZUMLINK devices|N/A
49	49	|Network Topology|(((
50	50	* Flat
...	...	@@ -132,8 +132,16 @@
132	132	SHOWRUNNER™: Y
133	133	Floor Hub: N
134	134	)))|N|N/A
135		-|Minimum ZUM-NET Firmware|ZUM-WIRED 1.00.08 puf|N/A|See Crestron|See Crestron
136		-|Minimum SHOWRUNNER™ Version|2.208|N/A|N/A|N/A
	135	+|Minimum ZUM-NET Firmware|(((
	136	+CNET Mode: ZUM-WIRED 1.00.09 puf
	137	+ZUM Mode: ZUM-WIRED  1.xx.xxx puf (Pending)
	138	+)))|N/A|See Crestron|See Crestron
	139	+|Minimum SHOWRUNNER™ Version|(((
	140	+CNET Mode: 3.003
	141	+ZUM Mode: TBD
	142	+)))|N/A|N/A|N/A
	143	+|ZWMS (Zum Wired Master/Slave Mode)|MASTER|Same as Floor Hub|MASTER|MASTER or SLAVE
	144	+|ZWMODE|CNET or ZUM (ZUM Support Pending official release from Crestron)|Same as Floor Hub|ZUM|ZUM
137	137
138	138	{{id name="caveats"/}}
139	139
...	...	@@ -140,12 +140,15 @@
140	140	==== Caveats ====
141	141
142	142	* Consult Chief Integrations to verify sequence of operations if there are any concerns.
143		-* Additional caveats TBD
	151	+* Additional caveats:
	152	+** Occupancy status is not reported to ShowRunner when ZUMNET/ZUMLINK JBOXs come online.  This has been acknowledged as a bug by Crestron in firmware v1.001.054 and v1.00.009 and is pending a fix from Crestron.
	153	+** Raw Occupancy reporting does not work.  A delay of 5 seconds to 5 minutes between sensor vacancy and reported vacancy to ShowRunner.  ShowRunner attempts to set 30 seconds (v3.003 to v3.009) or 5 seconds (v3.010 and later) but it is not always honored.  This has been acknowledged as a bug by Crestron in firmware v1.001.054 and v1.00.009 and is pending a fix from Crestron.
	154	+** Cresnet Discovery is not working on ZUMNET-JBOXs.  Crestron has acknowledged a fix has been sent to QE.
144	144
145	145	==== FAQ: ====
146	146
147	147	* I want to have a single connection to the building and have all of my Crestron devices on the Control Subnet (same topology as a ZUM-FLOOR-HUB) and use ShowRunner™ Total Control?
148		-//Use a CP4N in lieu of the ZUM-FLOOR-HUB.  A DIN-AP4 is not required.//
	159	+//Use a CP4N in lieu of the ZUM-FLOOR-HUB.  A DIN-AP4 is not required.  Crestron can supply a DIN-EN-6X18 with CEN-SW-POE-16 and CP4N racked in a 2RU mount plus 3 DIN rails.//
149	149	* Do I need a Crestron BACnet license when using ShowRunner for BACnet integration?
150	150	//If over 50 BACnet points are needed then a license (SW-3SERIES-BACNET-50+) will be needed for each Crestron processor that will provide BACnet points to the BMS.//
151	151