Wiki source code of Installation Guide

Version 10.1 by Austin Weygandt on 2022/07/20 17:45

version	line-number	content
7.1	1	=== Installing CI-GLPAC ===
3.2	2
	3
	4	A static IP is required for the XPanel UI.
	5
	6	dhcp off
	7
	8	ipa 0 10.0.0.10
	9
	10	ipm 0 255.255.255.0
	11
	12	defr 0 10.0.0.1
	13
	14
	15	If a load script was provided:
	16
	17	Open Toolbox > Script Manager and right click in the empty space, then select the top option: "Load Script..."
	18
	19	[[image:1658336699737-665.png\|\|height="395" width="694"]]
	20
	21	Select the file "GLPAC_LoadScript.txt" to populate the tool with operations. In most cases this will be just "GLPAC" which loads the program via USB.
	22
	23	[[image:1658336908248-692.png\|\|height="103" width="693"]]
	24
7.1	25	Double click an entry to run it, or right click and "Start Selected". This will execute the script and the Status column will update as the script progresses.
3.2	26
	27	[[image:1658337005335-932.png\|\|height="312" width="255"]]
	28
10.1	29	Answer "Yes" to the following prompts
7.1	30
10.1	31	CI-GLPAC works for all models of GLPAC
	32
	33	[[image:1658338685165-821.png\|\|height="204" width="391"]]
	34
	35	GLPAC firmware hasn't been updated since 2013
	36
	37	[[image:1658338738816-788.png\|\|height="252" width="390"]]
	38
7.1	39	Loading through Text Console:
	40
10.1	41	Copy contents of NVRAM folder into the NVRAM folder of the GLPAC. (These files are read on program load, so do this before or the program needs to be restarted)
	42
7.1	43	Connect to the GLPAC and click the lightning bolt in the bottom left, then select SIMPL Program
	44
	45	[[image:1658338182116-487.png\|\|height="179" width="447"]]
	46
	47	Browse for the .spz file and click "Send". Make sure to check the "Send SIG File" box at the bottom to allow future debugging if necessary.
	48
	49	[[image:1658338381847-812.png\|\|height="472" width="418"]]
	50
	51
3.2	52	Link to Cresnet IDs