Skip to Content

Installation Guide

Version 10.1 by Austin Weygandt on 2022/07/20 17:45

Installing CI-GLPAC

A static IP is required for the XPanel UI.

dhcp off

ipa 0 10.0.0.10

ipm 0 255.255.255.0

defr 0 10.0.0.1

If a load script was provided:

Open Toolbox > Script Manager and right click in the empty space, then select the top option: "Load Script..."

1658336699737-665.png

Select the file "GLPAC_LoadScript.txt" to populate the tool with operations. In most cases this will be just "GLPAC" which loads the program via USB.

1658336908248-692.png

Double click an entry to run it, or right click and "Start Selected". This will execute the script and the Status column will update as the script progresses.

1658337005335-932.png

Answer "Yes" to the following prompts

CI-GLPAC works for all models of GLPAC

1658338685165-821.png

GLPAC firmware hasn't been updated since 2013

1658338738816-788.png

Loading through Text Console:

Copy contents of NVRAM folder into the NVRAM folder of the GLPAC. (These files are read on program load, so do this before or the program needs to be restarted)

Connect to the GLPAC and click the lightning bolt in the bottom left, then select SIMPL Program

1658338182116-487.png

Browse for the .spz file and click "Send". Make sure to check the "Send SIG File" box at the bottom to allow future debugging if necessary.

1658338381847-812.png

Link to Cresnet IDs