Ethernet Intersystem Communications (Crestron)

Version 5.2 by Mark Kohlmann on 2021/07/14 16:24

ShowRunner provides Ethernet Intersystem Communications interfaces for integration with 3rd party Crestron systems.

  • EISCs may be Classic, 3-Series, or Server/Client (VC-4) types
  • EISCs can have their IP-ID and IP Address of the remote changed at run-time without a program restart
  • An RSD file will be built for each EISC and a URL will be displayed on the touchscreen to retrieve it
  • There are 2 EISC modes and only one mode is supported on an EISC definition, multiple EISCs may be defined
    • AV Integration
      • Provides a standardized interface for controlling areas
      • Area selection may be changed at run-time
      • AV Integration Demo
      • Signals Provided per Area (signals vary by Area settings/configuration):
        • Area Name
        • Occupied
        • Occupancy Enable/Disable
        • Color Temp Auto
        • Color Temp Manual Set and Feedback
        • Area Master Raise/Lower
        • Save Current Scene
        • Recall Scene # and Current Scene Feedback
        • Extended Scene Export option set
          • Scene Count
          • Scene Names
        • Load Count
        • Load Level Analogs
        • Load Names
        • Extended Load Export option set
          • CCT Load type: Color Temp
          • RGB[A|W]: Individual Color Channels
        • Shade Count
        • All Shade Open/Close
        • Shade Name
        • Shade Open/Close/Stop
        • Ignore Fade Times option set
          • Fade Times are not sent out, only final value.  Reduces traffic.
    • Device Export
      • Exports devices with specific signals for each device type
        • Occupancy Sensor
          • Occupied
          • Online Feedback
        • Keyswitch
          • Active Feedback
        • Partition Sensor
          • Combined Feedback
        • Keypad
          • Enable/Disable w/ Feedback
          • Button Press Event
          • Button Feedback Setting
          • Extended Keypad Export option set
            • Button Tap/Double Tap/Held Events
        • Global Actions
          • Activate
        • Shade
          • Open/Close/Stop
        • Load
          • Level Set and Feedback
        • Photocell
          • Sensor Reading
        • Area
          • Scene Set and Feedback
      • Devices to be exported are defined in the configuration and are not changeable at run-tim

Note: Any changes to load hardware/scene quantity will require a regeneration of the EISC and will result in signal changes.

Tags:
Created by Mark Kohlmann on 2021/06/02 21:46
    

Navigation